Weider WESY39310 user manual

Page 19

41.Press a 1 1/2” Square Inner Cap (32) into the Leg Lever (29).

Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame (36) with the Bolt and a 5/16” Nylon Locknut (3).

Insert the 5/16” x 2” Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 5/16” Washer (8) and a 5/16” Nylon Locknut (3) onto the Eyebolt.

42.Rest the Front Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16” x 2 3/4” Carriage Bolt (14), 5/16” Washer (8), and the Seat Knob (40).

43.Press two 3/4” Round Inner Caps (34) into each Pad Tube (28).

Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube.

Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Foam Pad (30) onto each end of the Pad Tube.

19

41
	36
33	3
33
	29
35	8
	8
	3
	32
42
42	40
42
	8
14
	36
Pin
43
	30
	34
	28
36	34
36
30
	29

Image 19

Contents Model No. WESY39310 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Decal No Before YOU BeginQuestions? AssemblyChart located in the center of this manual Following Tools not Included are Required for AssemblyDo not tighten the Nylon Locknuts yet Locknuts yetTighten all 5/16 Nylon Locknuts 3 used in steps Weight Guides are at the top, as shown On the Weight Tube is sitting in the pin grooves Top WeightHoles in the Weight Guides are at the top, as Shown Nylon Locknut the Leg Press Arm must be able to pivot freely Locate and open the parts bag labeled ARM AssemblyNylon Locknut yet Cable Assembly Locknut the Pulley Bracket must be able to move freely Page X 9/16 Spacer 7 to the Press Frame 17 with Locate the Low Cable 23 and the bag labeledLOW PULLEY. Route the Low Cable under 2 Low Pulley 76. Attach the PulleyPage Cable Trap is positioned to hold the Cable in place Page Locate and open the parts bag labeled Seat Assembly Seat AssemblyPage Page Changing the Weight Setting AdjustmentsAttaching and Removing the Seat Adjusting the LEG Press PlateAttaching the LEG Lever to the LOW Pulley Station Plates Weight Resistance ChartTightening the Cables TROUBLE-SHOOTING and MaintenanceTOP View Cable DiagramsLeg Press Cable Military Press Cable 72 and Leg Press CableExploded DRAWING-Model No. WESY39310 Page Page Part LIST-Model No. WESY39310 Exploded Drawing Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT