Weider user manual Exploded DRAWING-Model No. WESY39310

Page 27

EXPLODED DRAWING—Model No. WESY39310

1/4" x 2" Machine Screw (81)

3/8" Nylon Locknut (21)

3/8" Washer (9)

3/8" Nylon Jamnut (99)

5/16" x 1 3/4" Bolt (24)

5/16" Washer (8)

5/16" Nylon Locknut (3)

#8 x 1/2" Self-

tapping Screw (87)

1/4" Washer (10)

5/16" Nylon Jamnut (93)

1/4" x 3/4" Screw (18)

1/4" Nylon Locknut (2)

Cable Clip (53)

1" x 7/8" Plastic Bushing (90)

1 1/8" x 2 1/2" Plastic Bushing (89)

R1001A

3/8" x 8" Bolt (59)

"V"-Pulley (50)	3 1/2" Pulley (15)
(Not shown to scale)	(Not shown to scale)	1" Retainer (69)

Image 27

Contents QUESTIONS? Model No. WESY39310 Serial NoCustomer HOT Line Table of Contents Important Precautions Decal No Before YOU BeginQuestions? AssemblyChart located in the center of this manual Following Tools not Included are Required for AssemblyDo not tighten the Nylon Locknuts yet Locknuts yetTighten all 5/16 Nylon Locknuts 3 used in steps On the Weight Tube is sitting in the pin grooves Top Weight Weight Guides are at the top, as shownHoles in the Weight Guides are at the top, as Shown Nylon Locknut the Leg Press Arm must be able to pivot freely Locate and open the parts bag labeled ARM AssemblyNylon Locknut yet Cable Assembly Locknut the Pulley Bracket must be able to move freely Page X 9/16 Spacer 7 to the Press Frame 17 with Locate the Low Cable 23 and the bag labeledLOW PULLEY. Route the Low Cable under 2 Low Pulley 76. Attach the PulleyPage Cable Trap is positioned to hold the Cable in place Page Locate and open the parts bag labeled Seat Assembly Seat AssemblyPage Page Changing the Weight Setting AdjustmentsAdjusting the LEG Press Plate Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station Plates Weight Resistance ChartTightening the Cables TROUBLE-SHOOTING and MaintenanceTOP View Cable DiagramsLeg Press Cable Military Press Cable 72 and Leg Press CableExploded DRAWING-Model No. WESY39310 Page Page Part LIST-Model No. WESY39310 Exploded Drawing Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT