Technics WX-H3050 manual Troubleshooting, Symptom

Page 18

Troubleshooting

Symptom

The power indicator blinks red.

The power indicator lights red and a constant beep is heard in the headphone.

Cannot turn on the headset.

Cannot communicate with other store personnel or the customer at the menu board.

Cannot hear or talk to the cus- tomer, but communications with the store personnel are OK.

Cause/solution

The headset ID is not registered in the center module of the tar- get.

Register ID in the center module of the target.

The battery is almost exhausted.

Recharge the battery.

(Refer to the operating instructions of the battery charger.)

The battery is exhausted.

The battery is not inserted correctly.

Recharge the battery. Position the battery properly.

The center module may be turned off.

Turn on the power switch of the center module. (Refer to the operating instructions of the center module.) If no remedy exists, consult your dealer for repairs.

The headset ID is not registered in the center module of the tar- get.

Register ID in the center module of the target.

The vehicle detector may be malfunctioning because the detec- tor is not plugged into the center module, no power is supplied, or the detecting function is out of order.

Check that the vehicle detector is plugged in and has power. (Refer to the operating instructions of the center module.)

If no remedy exists, consult your dealer for repairs.

Reference

pages

17

9

17

Cannot "page" or "talk" in certain areas.

Talk or page operation is impossible from the All-in-One Headset set in the manager mode.

Radio waves cannot reach the area.

 

Remove any metal obstacles blocking radio waves.

Check that the Telephone Indicator of the Center Module is not

 

 

turned ON.

 

If the indicator is turned ON, the Optional Function Button [R] is

8

turned ON.

 

Press the Optional Function Button [R] again and check that the Telephone Indicator is turned OFF.

18

Image 18
Contents Operating Instructions English Version Disclaimer of Warranty Limitation of LiabilityImportant Safety Instructions Contents Features PrecautionsPreface Major Operating Controls and Their Functions Microphone 0Lane Indicator Battery Lock EjectPower Button Power 1Power IndicatorReplacement Battery Loading & ReplacementInstallation LoadingOperating Procedures PreparationsCommunications with Customers Talk Communications with Other Store PersonnelControl of the device control ter- minals Double-Drive-Thru connectionsManager Mode Only one head- set Canceling the Manager ModeAuto-Talk-Lock setup for only one headset Maintenance Setup Procedures Opening the Switch CompartmentDIP Switch Setup ID Registration Deletion of IDTroubleshooting SymptomSpecifications Standard Accessories Optional AccessoriesVersion Française Limitation de responsabilité Déni de la garantieInstructions de sécurité importantes Table DES Matières Préface Caractéristiques dominantesMesures de précaution Principaux organes de commande et fonctions Microphone 0Indicateur de passage Bouton dalimentation PowerRembourrage découteur Perche de microphone 1Indicateur dalimentationChargement Chargement et remplacement de la batterieRemplacement RemarquesModes dutilisation PréparatifsCommunications avec les Clients Talk Communication avec dautres membres du personnel du MagasinBornes de commande de Périphérique extérieur Double-Drive-ThruMode de gérant seulement un Combiné microcasque découte Annulation du mode gérantAuto-Talk-Lock Coussin découteur Procédures de configuration Configuration dinterrupteur DIPOuverture du logement de Commutateur Enregistrement didentification Suppression dune identificationDépannage SymptômeCaractéristiques techniques Accessoires standard Accessoires optionnelsPanasonic System Solutions Company Panasonic Canada IncPanasonic Sales Company