■Manager Mode (Only one head- set)
Complete ID Registration, to do this setting.
The headset set to the Manager mode has following func- tionality.
•The manager can interrupt store personnel's TALK or PAGE at any time by monopolizing one channel by prior- ity.
•The Manager hears audio from POS alone.
1.Hold down the power button for two seconds or more to turn off the headset.
Power button
2.While holding R and T1 simultaneously, press the power button to turn on the headset.
The headset enters manager setting mode where the indicators and buttons have different functions than in normal operation. You can hear "Connecting center module A" and power indicator is an alternate blinking of red and green. Also the Lane indicator A is blinking yel- low.
Keep holding down (LANE A)
Keep holding down (LANE B)
When you want to register the manager in another cen- ter module in a
3.If manager mode setting is successful, you can hear "Manager" and the power indicator blinks green.
■Canceling the Manager Mode
1.Turn off the power of
Power button
2.When LANE A is set in the manager mode, keep press- ing the R and T1 buttons simultaneously and start up the power of
When LANE B is set in the manager mode, keep press- ing the R and T2 buttons simultaneously and start up the power of
The power indicator then blinks reciprocally in red and green. A message of "Connecting Center Module A (or B)" is heard from the
Keep holding down (LANE A)
Keep holding down (LANE B)
3.When canceling of the manager mode is complete, reci- procal blinking of the power indicator turns to continu- ous lighting in green.
13