Electrolux 1600 manual Set the options, e.g. Delay Start

Page 30

Set the options, e.g. DELAY START

This option allows the start time for a wash programme to be delayed from 30 minutes to a maximum of 23.5 hours.

1.Press the OPTIONS button.

DELICATES 30°C

1000 RPM

11:25-12:36

START

î

30°

LINEN/EASY-C.

ENERGY SAVING

 

1000

COTTONS

DELICATES)

 

OPTIONS

WOOLLENS H

2.Use the control knob to highlight the DELAY START option.

3.Press the SELECT button.

DELICATES 30°C

1000 RPM

11:25-12:36

START

ç

SELECT

TIME SAVING

DELAY START(

 

BACK

STAIN

PRE WASH

 

EXTRAS

 

4.Use the control knob to set the time at which you want the wash programme to end.

3 The DELAY START option can be set at 30-minute inter- vals.

DELICATES 30°C

1000 RPM

11:25-14:06

START

è

SELECT

END OF PROGRAMME

 

BACK

14:06 H:MIN(

5.Press the SELECT button.

The programme end time will change in the information panel (e.g. 14:06).

6.Press the START button.

3 While DELAY START is counting down, the washing machine is switched into stand-by mode. The background illumination of the display will go out.

Cancelling DELAY START:

Press the START button.

The wash programme will start immediately.

DELICATES 30°C

1000 RPM

11:25-14:06

START

 

DELAY START

1000

[==##############

UNLOCK DOOR

 

30

Image 30
Contents ÖKO-LAVAMAT Following symbols are used in the text Dear CustomerContents Anti-flood Aqua Control + Aqua Alarm Changing the languageInstallation and connection instructions Safety Prior to initial start-upIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingTurn the appliance on by Possible languages will appear in the right of the displayDescription of appliance Front viewDrawer for detergent and conditioner Information panel Control panel with displayCancelling settings Main control featuresSwitching the appliance on and off Off. When the appliance isNavigation display Control knob and pagesButtons and levels Level OptionsFirst set the programme level 1, then the option level Setting a programme an example Level ExtrasTion has been activated Will appear in the symbol row Press the Start button. The wash programme will startWoollens H handwash Overview of functionsProgrammes Level Wash programmes Silk H handwashAn especially gentle wash programme which Special programmes40-60 MIX Cose, modal, cupro, lyocellOptions level Extras level Sensitive SMore water when rinsing Water is very soft, it canHowever be helpful to use Preparing for a wash cycle Sorting and preparing the washingTypes of washing and care symbols Quantities of detergent and conditioners? Water softeningWater hardness details Setting the time Before the first washCarrying out a wash programme prior to first use Performing a wash cycle Opening and closing the doorLoading the washing Adding detergents/conditioners Adding detergent/conditionerCompartment for liquid conditioners centre front Setting a wash programme If using liquid detergents/tabletsSet the options, e.g. Delay Start Delay Start option can be set at 30-minute inter- valsIf a delayed start has been set Starting a wash programmeMoisture/Loading Cancelling the programmeWash programme progress Changing the spin speedSpin When the wash programme is completeFor rinse hold Set the desired spin speedIf Overdosing is shown Overdosing indicatorUnloading the washing Amount of washing loaded the next time you washSaving a programme setting MemoryIf Memory is highlighted Press the Select button Cancelling a saved programme setting Changing the language Select English Back DEUTSCH§ ITALIANO§ FRANÇAIS§ Extras Maintenance and Cleaning Control panelDetergent Dispenser Drawer Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorRemedying a malfunction FORCE! or an error code CD6 is shownWhat to do if FollowsStart button was Screw the inlet hose Tion CD 1 / Please Outlet hose is kinked Straighten the hose Washing has not If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying When the water is completely drained Drain pumpWhat does Update mean? Close the flapChild Safety Feature Setting the child safety featureCancelling the child safety feature Consumption values and load sizes Consumption valuesLoad sizes Wash programme Type of fabric Load size in kg1Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingPage Installation-Site preparation Installation on a concrete baseInstallation on a Suspended Floor Levelling the applianceElectrical Connection Brown LivePermanent Connection Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Height Adjustment Approx. +10 / -5mm Technical dataDimensions Dimensions in mmWarranty conditions Great BritainPage Page Page Index 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG