Electrolux 1600 manual Tion CD 1 / Please

Problem	Possible cause	Remedy
		As soon as the power failure
		is over the wash programme
		will continue.
	A power failure has occurred.	If you wish to remove the
The display goes out		washing: If water is visible in
while a wash pro-	For reasons related to safety,	the viewing window, first
gramme is running.	the filling door will remain	carry out an emergency
	locked for approx. 4 minutes.
		emptying procedure (see sec-
		tion “Carrying out an emer-
		gency emptying procedure”).
		After approx. 4 minutes the
		door can be opened.
	The tap is not fully open.	Turn the tap on fully.
Detergent residues are	The filter in the threaded in-	Close the tap. Unscrew the
accumulating in the
	let hose fitting is clogged at	inlet hose from the tap and
detergent drawer.
	the tap or at the washing	from the machine. Clean the
	machine.	filter.
The rinse water is	The probable cause is a de-	No negative impact on the
	tergent with a high silicate	rinse result; try using a liquid
cloudy.
	content.	detergent.
The background illumi-
nation of the display	The washing machine is in	Press any of the buttons.
has gone out even
	stand-by mode.
though the appliance is
switched on.
	The tap is closed.	Open the tap.
Water is not entering	The filter in the threaded in-	Close the tap. Unscrew the
the appliance. ATTEN-		hose from the tap, take out
TION CD 1 / PLEASE	let hose fitting is clogged.	the filter and wash it under
OPEN THE TAP is show-		running water.
ing in the display.	The tap is furred with limes-	Check the tap and have it re-
	cale or faulty.	paired if necessary.
The washing machine
drain pump runs con-	The Aqua Control anti-flood	Close the tap, remove the
tinuously - even when		mains plug from the socket
	system is in operation.
the appliance is		and contact Service Force.
switched off.

45