Electrolux 1600 manual Installation of the appliance, Transporting the appliance

Page 55

Installation of the appliance

Transporting the appliance

•Do not place the washing machine on its front or on its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet.

•Never transport the unit without the transport packaging and bolts/ bars. Do not remove the transport packaging until the appliance is at the installation location. Transporting the unit without the transport packaging can damage it.

•Never lift the appliance by the door.

When transporting the unit with a sack trolley:

•Attach the sack trolley only at the side. The shovel of the sack trolley must not be longer than 24 cm, otherwise the float switch can be de- stroyed.

Remove transport packaging

Important! It is essential to re- move the transport packaging be- fore putting the appliance into operation. Keep all parts of the transport packaging in a safe place for future use.

1. Open both hose holders on the appliance's rear side and remove the hoses and mains cable.

55

Image 55

Contents ÖKO-LAVAMAT Dear Customer Following symbols are used in the textContents Changing the language Anti-flood Aqua Control + Aqua AlarmInstallation and connection instructions Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsPossible languages will appear in the right of the display Turn the appliance on byFront view Description of applianceDrawer for detergent and conditioner Control panel with display Information panelOff. When the appliance is Main control featuresSwitching the appliance on and off Cancelling settingsControl knob and pages Navigation displayLevel Options Buttons and levelsFirst set the programme level 1, then the option level Level Extras Setting a programme an examplePress the Start button. The wash programme will start Tion has been activated Will appear in the symbol rowSilk H handwash Overview of functionsProgrammes Level Wash programmes Woollens H handwashCose, modal, cupro, lyocell Special programmes40-60 MIX An especially gentle wash programme whichOptions level Sensitive S Extras levelWater is very soft, it can More water when rinsingHowever be helpful to use Sorting and preparing the washing Preparing for a wash cycleTypes of washing and care symbols Water softening Quantities of detergent and conditioners?Water hardness details Before the first wash Setting the timeCarrying out a wash programme prior to first use Opening and closing the door Performing a wash cycleLoading the washing Adding detergent/conditioner Adding detergents/conditionersCompartment for liquid conditioners centre front If using liquid detergents/tablets Setting a wash programmeDelay Start option can be set at 30-minute inter- vals Set the options, e.g. Delay StartStarting a wash programme If a delayed start has been setChanging the spin speed Cancelling the programmeWash programme progress Moisture/LoadingSet the desired spin speed When the wash programme is completeFor rinse hold SpinAmount of washing loaded the next time you wash Overdosing indicatorUnloading the washing If Overdosing is shownMemory Saving a programme settingIf Memory is highlighted Press the Select button Cancelling a saved programme setting Changing the language Select English Back DEUTSCH§ ITALIANO§ FRANÇAIS§ Extras Control panel Maintenance and CleaningDetergent Dispenser Drawer Main door Maintenance WashTo run a maintenance wash Washing Machine DrumFollows FORCE! or an error code CD6 is shownWhat to do if Remedying a malfunctionStart button was Screw the inlet hose Tion CD 1 / Please Outlet hose is kinked Straighten the hose Washing has not If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying Drain pump When the water is completely drainedClose the flap What does Update mean?Setting the child safety feature Child Safety FeatureCancelling the child safety feature Consumption values Consumption values and load sizesWash programme Type of fabric Load size in kg1 Load sizesInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the appliancePage Installation on a concrete base Installation-Site preparationLevelling the appliance Installation on a Suspended FloorBrown Live Electrical ConnectionPermanent Connection Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Height Adjustment Approx. +10 / -5mmGreat Britain Warranty conditionsPage Page Page Index Customer Care 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG