Electrolux 1600 manual Inlet Hose Connection

Page 62

Inlet Hose Connection

A pressure hose 1.5m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by your local Serv- ice Force Centre is permissible.

–Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua Control.

–Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with Aqua Control.

Important! Never cut hoses into pieces in order to extend them!

3 Sealing rings are supplied either in the plastic nuts of the hose screw connection or in the enclosed pack. Do not use other seals!

1. Connect the hose with the angled connection to the machine.

Important!

– Do not lay the inlet hose verti- cally downwards. Instead, turn it to the right or left as shown in the diagram.

– Tighten firmly to prevent leakage but do not use excessive force.

2.Connect the hose with a straight

connection to a water tap with a screw thread R 3/4 (inches). Important! Only tighten the screw connection manually.

3. By slowly opening the water tap before putting the washing ma- chine into operation it is possible to check that the connection is free of leaks.

62

Image 62

Contents ÖKO-LAVAMAT Following symbols are used in the text Dear CustomerContents Anti-flood Aqua Control + Aqua Alarm Changing the languageInstallation and connection instructions Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingTurn the appliance on by Possible languages will appear in the right of the displayDrawer for detergent and conditioner Description of applianceFront view Information panel Control panel with displayCancelling settings Main control featuresSwitching the appliance on and off Off. When the appliance isNavigation display Control knob and pagesFirst set the programme level 1, then the option level Buttons and levelsLevel Options Setting a programme an example Level ExtrasTion has been activated Will appear in the symbol row Press the Start button. The wash programme will startWoollens H handwash Overview of functionsProgrammes Level Wash programmes Silk H handwashAn especially gentle wash programme which Special programmes40-60 MIX Cose, modal, cupro, lyocellOptions level Extras level Sensitive SHowever be helpful to use More water when rinsingWater is very soft, it can Preparing for a wash cycle Sorting and preparing the washingTypes of washing and care symbols Water hardness details Quantities of detergent and conditioners?Water softening Setting the time Before the first washCarrying out a wash programme prior to first use Loading the washing Performing a wash cycleOpening and closing the door Compartment for liquid conditioners centre front Adding detergents/conditionersAdding detergent/conditioner Setting a wash programme If using liquid detergents/tabletsSet the options, e.g. Delay Start Delay Start option can be set at 30-minute inter- valsIf a delayed start has been set Starting a wash programmeMoisture/Loading Cancelling the programmeWash programme progress Changing the spin speedSpin When the wash programme is completeFor rinse hold Set the desired spin speedIf Overdosing is shown Overdosing indicatorUnloading the washing Amount of washing loaded the next time you washSaving a programme setting MemoryIf Memory is highlighted Press the Select button Cancelling a saved programme setting Changing the language Select English Back DEUTSCH§ ITALIANO§ FRANÇAIS§ Extras Detergent Dispenser Drawer Maintenance and CleaningControl panel Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorRemedying a malfunction FORCE! or an error code CD6 is shownWhat to do if FollowsStart button was Screw the inlet hose Tion CD 1 / Please Outlet hose is kinked Straighten the hose Washing has not If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying When the water is completely drained Drain pumpWhat does Update mean? Close the flapCancelling the child safety feature Child Safety FeatureSetting the child safety feature Consumption values and load sizes Consumption valuesLoad sizes Wash programme Type of fabric Load size in kg1Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingPage Installation-Site preparation Installation on a concrete baseInstallation on a Suspended Floor Levelling the applianceElectrical Connection Brown LivePermanent Connection Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Height Adjustment Approx. +10 / -5mm Technical dataDimensions Dimensions in mmWarranty conditions Great BritainPage Page Page Index 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG