Electrolux 1600 manual Screw the inlet hose

Problem	Possible cause	Remedy
	The threaded inlet hose fit-	Screw the inlet hose in
	ting is leaking.	firmly.
	The outlet hose is leaking.	Check the outlet hose and
		replace if necessary.
	The drain pump cover is not	Close the cover properly.
	closed properly.
Water is running out	Washing has been trapped in	Cancel the programme and
from under the wash-		free the washing from the
ing machine.	the door.	door. Restart the programme.
		Close the emergency empty-
	The emergency emptying	ing hose properly (see sec-
		tion “Carrying out an
	hose is not closed properly or	emergency emptying proce-
	is leaking.	dure”). If the emergency
		emptying hose is leaking, call
		Service Force.
Conditioner is not be-	The conditioner insert is not
ing rinsed in, and the		Clean the detergent drawer,
	correctly set into the addi-
w compartment for		insert the conditioner insert
	tive compartment or is
additives is full of wa-		firmly.
	clogged.
ter.
		Observe maximum load sizes
The washing is badly	Too much washing was prob-	(see chapter “Consumption
		values and load sizes”). Select
creased.	ably loaded.	the EASY IRON programme
		for easy-care items.
The washing has not	The washing was not able to	Always load the drum as full
		as possible with a
been spun as dry as	be distributed evenly in the
		combination of large and
usual.	drum prior to spinning.
		small items.
The door cannot be	The door is looked for rea-	Wait until the O symbol ap-
opened when the	sons related to safety.	pears.
washing machine is
switched on. The N	The washing machine is in	Press any button.
symbol is showing in
	stand-by mode.
the display.

44