Electrolux 1600 manual Starting a wash programme, If a delayed start has been set

Page 31

Starting a wash programme

1.Check that the water tap is open.

2. After you have set the wash

DELICATES 30°C

programme and any options,

1000 RPM

11:25-12:36

press the START button.

START

è

The wash programme will

BACK

LINEN/EASY-C.

ENERGY SAVING

 

 

start.

1000

COTTONS

 

 

DELICATES)

3 Approx. 30 seconds after the

EXTRAS

WOOLLENS H

 

 

washing machine is switched

 

 

on or after a button or the control knob was last actuated, the START

indicator will begin to flash. If you do not wish to make any further

settings, press the START button.

 

 

If a delayed start has been set:

If the DELAY START option has been selected, the wash programme will finsh at the time shown in the display. If the wash programme has not yet been started, you can still cancel the delay start. The wash pro- gramme will start immediately. (See chapter “Set the options, e.g. DELAY START”.)

If you would like to add washing even after the programme has started.

1.Press the UNLOCK DOOR button. The O symbol will appear.

2.Open the door. Add the items.

DELICATES 30°C

1000 RPM

11:25-14:36

START

 

DELAY START

 

[==##############

1000

 

UNLOCK DOOR

 

3.Then close the door and press the LOCK DOOR but- ton.

DELICATES 30°C

1000 RPM

11:25-14:36

START

 

DELAY START

 

[==##############

1000

 

LOCK DOOR

31

Image 31
Contents ÖKO-LAVAMAT Dear Customer Following symbols are used in the textContents Changing the language Anti-flood Aqua Control + Aqua AlarmInstallation and connection instructions Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsPossible languages will appear in the right of the display Turn the appliance on byFront view Description of applianceDrawer for detergent and conditioner Control panel with display Information panelOff. When the appliance is Main control featuresSwitching the appliance on and off Cancelling settingsControl knob and pages Navigation displayLevel Options Buttons and levelsFirst set the programme level 1, then the option level Level Extras Setting a programme an examplePress the Start button. The wash programme will start Tion has been activated Will appear in the symbol rowSilk H handwash Overview of functionsProgrammes Level Wash programmes Woollens H handwashCose, modal, cupro, lyocell Special programmes40-60 MIX An especially gentle wash programme whichOptions level Sensitive S Extras levelWater is very soft, it can More water when rinsingHowever be helpful to use Sorting and preparing the washing Preparing for a wash cycleTypes of washing and care symbols Water softening Quantities of detergent and conditioners?Water hardness details Before the first wash Setting the timeCarrying out a wash programme prior to first use Opening and closing the door Performing a wash cycleLoading the washing Adding detergent/conditioner Adding detergents/conditionersCompartment for liquid conditioners centre front If using liquid detergents/tablets Setting a wash programmeDelay Start option can be set at 30-minute inter- vals Set the options, e.g. Delay StartStarting a wash programme If a delayed start has been setChanging the spin speed Cancelling the programmeWash programme progress Moisture/LoadingSet the desired spin speed When the wash programme is completeFor rinse hold SpinAmount of washing loaded the next time you wash Overdosing indicatorUnloading the washing If Overdosing is shownMemory Saving a programme settingIf Memory is highlighted Press the Select button Cancelling a saved programme setting Changing the language Select English Back DEUTSCH§ ITALIANO§ FRANÇAIS§ Extras Control panel Maintenance and CleaningDetergent Dispenser Drawer Main door Maintenance WashTo run a maintenance wash Washing Machine DrumFollows FORCE! or an error code CD6 is shownWhat to do if Remedying a malfunctionStart button was Screw the inlet hose Tion CD 1 / Please Outlet hose is kinked Straighten the hose Washing has not If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying Drain pump When the water is completely drainedClose the flap What does Update mean?Setting the child safety feature Child Safety FeatureCancelling the child safety feature Consumption values Consumption values and load sizesWash programme Type of fabric Load size in kg1 Load sizesInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the appliancePage Installation on a concrete base Installation-Site preparationLevelling the appliance Installation on a Suspended FloorBrown Live Electrical ConnectionPermanent Connection Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Height Adjustment Approx. +10 / -5mmGreat Britain Warranty conditionsPage Page Page Index Customer Care 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG