Electrolux 1600 manual Memory, Saving a programme setting

Page 35

MEMORY

Saving a programme setting

The MEMORY basic setting can be used to save frequently-used pro- gramme combinations (wash programme, temperature, spin speed and option/s). There are four memory cells available for this purpose. The saved programme can then be selected in the same way as any other wash programme.

3 Extras cannot be saved using MEMORY. They must be set separately and remain active until they are cancelled.

Example: LINEN/EASY-C., 40 °C, 1200 RPM spin, with SENSITIVE option.

1.Press the control knob. The appliance is now on.

2.Turn the knob to the LINEN/ EASY-C. prgramme.

3.Set the temperature and spin speed using the relevant buttons.

4.Press the OPTIONS button.

5.Use the control knob to highlight the SENSITIVE op- tion.

6.Press the SELECT button. The S symbol will appear in the display.

	LINEN/EASY-C. 40°C
	1200 RPM	10:17-12:16
	START	î
	40°	LINEN/EASY-C.)
	40°	ENERGY SAVING
		ENERGY SAVING

1200COTTONS

	DELICATES
OPTIONS	WOOLLENS H

LINEN/EASY-C. 40°C

1200 RPM

10:17-12:16

	START	ç
	SELECT	TIME SAVING
	SELECT	DELAY START
		DELAY START
	BACK	SENSITIVE)
	BACK	STAIN
		STAIN
	EXTRAS	PRE WASH

7. Press the EXTRAS button.
7. Press the EXTRAS button.		LINEN/EASY-C. 40°C
		1200 RPM	10:17-12:16

	START	S ç
	SELECT	TIME SAVING
	SELECT	DELAY START
		DELAY START
	BACK	SENSITIVE!)
	BACK	STAIN
		STAIN
	EXTRAS	PRE WASH

35

Image 35

Contents ÖKO-LAVAMAT Dear Customer Following symbols are used in the textContents Changing the language Anti-flood Aqua Control + Aqua AlarmInstallation and connection instructions Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsPossible languages will appear in the right of the display Turn the appliance on byDrawer for detergent and conditioner Description of applianceFront view Control panel with display Information panelOff. When the appliance is Main control featuresSwitching the appliance on and off Cancelling settingsControl knob and pages Navigation displayFirst set the programme level 1, then the option level Buttons and levelsLevel Options Level Extras Setting a programme an examplePress the Start button. The wash programme will start Tion has been activated Will appear in the symbol rowSilk H handwash Overview of functionsProgrammes Level Wash programmes Woollens H handwashCose, modal, cupro, lyocell Special programmes40-60 MIX An especially gentle wash programme whichOptions level Sensitive S Extras levelHowever be helpful to use More water when rinsingWater is very soft, it can Sorting and preparing the washing Preparing for a wash cycleTypes of washing and care symbols Water hardness details Quantities of detergent and conditioners?Water softening Before the first wash Setting the timeCarrying out a wash programme prior to first use Loading the washing Performing a wash cycleOpening and closing the door Compartment for liquid conditioners centre front Adding detergents/conditionersAdding detergent/conditioner If using liquid detergents/tablets Setting a wash programmeDelay Start option can be set at 30-minute inter- vals Set the options, e.g. Delay StartStarting a wash programme If a delayed start has been setChanging the spin speed Cancelling the programmeWash programme progress Moisture/LoadingSet the desired spin speed When the wash programme is completeFor rinse hold SpinAmount of washing loaded the next time you wash Overdosing indicatorUnloading the washing If Overdosing is shownMemory Saving a programme settingIf Memory is highlighted Press the Select button Cancelling a saved programme setting Changing the language Select English Back DEUTSCH§ ITALIANO§ FRANÇAIS§ Extras Detergent Dispenser Drawer Maintenance and CleaningControl panel Main door Maintenance WashTo run a maintenance wash Washing Machine DrumFollows FORCE! or an error code CD6 is shownWhat to do if Remedying a malfunctionStart button was Screw the inlet hose Tion CD 1 / Please Outlet hose is kinked Straighten the hose Washing has not If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying Drain pump When the water is completely drainedClose the flap What does Update mean?Cancelling the child safety feature Child Safety FeatureSetting the child safety feature Consumption values Consumption values and load sizesWash programme Type of fabric Load size in kg1 Load sizesInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the appliancePage Installation on a concrete base Installation-Site preparationLevelling the appliance Installation on a Suspended FloorBrown Live Electrical ConnectionPermanent Connection Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Height Adjustment Approx. +10 / -5mmGreat Britain Warranty conditionsPage Page Page Index Customer Care 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG