Electrolux 1600 manual Wash programme progress, Moisture/Loading, Changing the spin speed

Page 32
MOISTURE 49 %
11:25-12:36
N§

Wash programme progress

Each current stage of the programme is shown in the display during the wash pro- gramme, e.g. main wash, and a bar showing the pro- gramme progress.

The N symbol is displayed as the programme progresses: the loading door is locked.

DELICATES 30°C

1000 RPM

PAUSE

MAIN WASH

#####=========]

1000

Moisture/Loading

 

 

 

 

 

During the wash programme

 

 

 

 

 

 

 

LINEN/EASY-C. 60°C

 

the display additionally indi-

 

 

 

 

 

1400 RPM

11:25-12:36

 

 

 

 

cates:

 

 

PAUSE

N§

 

 

 

 

– the expected residual

 

 

 

MAIN WASH

 

 

 

 

#####=========]

 

moisture in the washing at

 

 

 

LOADING 80 %

 

 

 

1400

 

the end of the programme.

 

 

 

MOISTURE 50 %

 

 

 

 

 

The value depends on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

selected spin speed.

 

 

 

 

 

–the loading of the drum (in 10 per cent steps.)

This value is indicated with the LINEN/EASY-CARES and COTTONS programme only. The loading can be estimated by the washing ma- chine about fifteen minutes into the programme.

Changing the spin speed

The spin speed can still be changed and rinse hold still be set during the programme. Other settings cannot be changed.

Cancelling the programme

To cancel the programme before it has finished, switch off the appli- ance (press the control knob).

3 The wash programme can be interrupted at any time by pressing the PAUSE button.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents ÖKO-LAVAMAT Following symbols are used in the text Dear CustomerContents Anti-flood Aqua Control + Aqua Alarm Changing the languageInstallation and connection instructions Intended Use SafetyPrior to initial start-up Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingTurn the appliance on by Possible languages will appear in the right of the displayDrawer for detergent and conditioner Description of applianceFront view Information panel Control panel with displayMain control features Switching the appliance on and offCancelling settings Off. When the appliance isNavigation display Control knob and pagesFirst set the programme level 1, then the option level Buttons and levelsLevel Options Setting a programme an example Level ExtrasTion has been activated Will appear in the symbol row Press the Start button. The wash programme will startOverview of functions Programmes Level Wash programmesWoollens H handwash Silk H handwashSpecial programmes 40-60 MIXAn especially gentle wash programme which Cose, modal, cupro, lyocellOptions level Extras level Sensitive SHowever be helpful to use More water when rinsingWater is very soft, it can Preparing for a wash cycle Sorting and preparing the washingTypes of washing and care symbols Water hardness details Quantities of detergent and conditioners?Water softening Setting the time Before the first washCarrying out a wash programme prior to first use Loading the washing Performing a wash cycleOpening and closing the door Compartment for liquid conditioners centre front Adding detergents/conditionersAdding detergent/conditioner Setting a wash programme If using liquid detergents/tabletsSet the options, e.g. Delay Start Delay Start option can be set at 30-minute inter- valsIf a delayed start has been set Starting a wash programmeCancelling the programme Wash programme progressMoisture/Loading Changing the spin speedWhen the wash programme is complete For rinse holdSpin Set the desired spin speedOverdosing indicator Unloading the washingIf Overdosing is shown Amount of washing loaded the next time you washSaving a programme setting MemoryIf Memory is highlighted Press the Select button Cancelling a saved programme setting Changing the language Select English Back DEUTSCH§ ITALIANO§ FRANÇAIS§ Extras Detergent Dispenser Drawer Maintenance and CleaningControl panel Maintenance Wash To run a maintenance washWashing Machine Drum Main doorFORCE! or an error code CD6 is shown What to do ifRemedying a malfunction FollowsStart button was Screw the inlet hose Tion CD 1 / Please Outlet hose is kinked Straighten the hose Washing has not If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying When the water is completely drained Drain pumpWhat does Update mean? Close the flapCancelling the child safety feature Child Safety FeatureSetting the child safety feature Consumption values and load sizes Consumption valuesLoad sizes Wash programme Type of fabric Load size in kg1Installation and connection instructions Installation Safety PrecautionsInstallation of the appliance When transporting the unit with a sack trolleyTransporting the appliance Remove transport packagingPage Installation-Site preparation Installation on a concrete baseInstallation on a Suspended Floor Levelling the applianceElectrical Connection Brown LivePermanent Connection Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsHeight Adjustment Approx. +10 / -5mm Dimensions in mmWarranty conditions Great BritainPage Page Page Index 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents