Electrolux 88840 manual Setting the Delay Timer/Soaking time

Page 22

Operating Instructions

Setting the Delay Timer/Soaking time

Delay Timer

The DELAY TIMER button lets you delay the start of a wash programme for up to 19 hours.

01. Select a wash programme.

2. Press the DELAY TIMER button.

3. Press the START/PAUSE button.

When a time delay has been set, DELAY TIMER lights up.

Press the DELAY TIMER button re-

peatedly until the Multi-display shows the desired time delay, for ex- ample,12h indicates a delay of 12 hours before the programme starts. If the display shows19h and you press the button again, the time delay is cancelled. The running time of the selected wash programme is shown (in minutes, for example120). The time delay set can also be can- celled by turning the programme selector to the OFF position.

Soaking time

If you have pressed the PRE-WASH button, you can use the DELAY TIMER button to extend the soaking time by up to 19 hours.

01. Press the PRE-WASH button.

2.Press the DELAY TIMER button.

Soaking time is set, WASH TIME lights up. The soaking time is now about 1 hour.

3.Soaking time can be extended (in hours) by repeatedly pressing the DE- LAY TIMER button again .

WASH TIME and DELAY TIMER are lit up.

22

Image 22
Contents ÖKO-LAVAMAT 88840 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Programme selectorWool / P Handwash Silk / P HandwashProgramme option buttons PRE-WASH Pre-wash/SoakingProgrammable functions Time SaverWash Time Display Consumption values and programme timesAnce spin detection and foam detection What does Update mean? Anti-flood Aqua Control + Aqua AlarmPreparing for a wash cycle Before the first washSorting and preparing the washing Types of washing and care symbols Water softening How much detergent and conditioner?Water hardness details Brief instructions Running a washing cycleAfter the washing programme has ended Setting the wash programme BlesSILK/PHandwash Selecting Spin Speed /Rinse HoldWOOL/PHandwash Cannot be changedPress the PRE-WASH button Press the Delay Timer button Setting the Delay Timer/Soaking timeSoaking time Automatically after approximately 3 minutes Opening and closing the doorLoading the washing For maximum loads, see Programme TablesCompartment for Pre-wash detergent Soaking agent Adding detergent/conditionersCompartment for main wash deter- gent Or for water softenerIf the Delay Timer is set If using liquid detergents/tabletsStarting the wash programme Wash programme progress Washing cycle complete/removing the washing Programme Progress DisplayDetergent was used in the washing programme just com Programme Tables WashingSeparate Rinsing/Conditioning/Starching/Treating Separate SpinningMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpWhat to do if Trouble ShootingLow Machine is not level Machine is Water tap is not fully Turn the water tap on fully Opened If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterEmergency unlocking of the door When the water is completely drainedUnlock feature Supply firstHelpful to rinse with extra water To cancel the additional rinseAdditional rinse cycle RINSE+ To set the additional rinseAdditional rinse cycle and water cooling To cancel water coolingWater cooling To set the water cooling functionVariomatic spin To cancel Variomatic SpinTo set Variomatic Spin Cancelling the Programme Protection Setting the Programme ProtectionProgramme Protection Washing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingCover the hole with the cap G Installation-Site preparation Installation on a Suspended FloorLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Connection to the machineWater Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty conditions Great BritainPage Page Page Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG