Electrolux 88840 manual Water tap is not fully Turn the water tap on fully Opened

		Operating Instructions
Problem	Possible Cause	Remedy
	The water tap is not fully	Turn the water tap on fully.
	opened.
Remnants of detergent
		Close the water tap. Unscrew
are building up in the	The inlet hose filter in the
detergent drawer.		the inlet hose from the water
	coupling of the inlet hose at
		tap and from the machine.
	the tap is blocked.
		Clean the filter.
The rinse water is	The cause is probably a de-	This has no negative effects
	tergent with a high silicate	on rinse results; use a liquid
cloudy.
	content.	detergent, if necessary.
When pressing a pro-
gramme option but-	The selected programme op-
ton, the corresponding	tion cannot be combined	Make another selection.
display does not light	with the set programme.
up.
Only END is illuminated	The washing machine is in	Press any of the buttons.
on the control panel.	Stand-by mode.
Only WASH TIME is lit
on the panel and the	Delay Start Timer is running,	Press any of the buttons to
WASH TIME display	and the washing machine is
		cancel Stand-by mode.
shows a number be-	in Stand-by mode.
tween 1 and 19.
The Programme	Programme Protection is	Turn the programme selec-
	switched on; the programme	tor back to the original posi-
Progress Display is
	selector has been moved	tion (see “Programme
flashing continuously.
	during the washing cycle.	Protection”).

37