Electrolux 88840 manual Installation and connection instructions, Installation Safety Precautions

Page 46

Installation and connection instructions

Installation and connection instructions

Installation Safety Precautions

•When moving do not tilt the washing machine onto its front or onto its right hand side (viewed from the front). This is to prevent the pos- sibility of the electronic components becoming wet.

•Before installation inspect the machine for transport damage. Do not connect the appliance if it is damaged - contact your retailer.

•Ensure all packaging and transit bolts/bars have been removed, see „Removal of Transit Packaging“. Failure to remove transit bolts/bars may cause serious damage to the appliance or property.

•Always insert the plug into a correctly installed earthed socket.

•Any plumbing work required to install this appliance should be carried out by a plumber or competent person.

•Check that the electricity supply is the same as that indicated on the appliance´s rating plate.

•Any electrical work required to install this appliance should be carried out by an electrician or competent person.

46

Image 46

Contents ÖKO-LAVAMAT 88840 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Programme selectorWool / P Handwash Silk / P HandwashProgramme option buttons PRE-WASH Pre-wash/SoakingProgrammable functions Time SaverWash Time Display Consumption values and programme timesAnce spin detection and foam detection What does Update mean? Anti-flood Aqua Control + Aqua AlarmPreparing for a wash cycle Before the first washSorting and preparing the washing Types of washing and care symbols Water softening How much detergent and conditioner?Water hardness details Brief instructions Running a washing cycleAfter the washing programme has ended Setting the wash programme BlesSILK/PHandwash Selecting Spin Speed /Rinse HoldWOOL/PHandwash Cannot be changedPress the PRE-WASH button Press the Delay Timer button Setting the Delay Timer/Soaking timeSoaking time Automatically after approximately 3 minutes Opening and closing the doorLoading the washing For maximum loads, see Programme TablesCompartment for Pre-wash detergent Soaking agent Adding detergent/conditionersCompartment for main wash deter- gent Or for water softenerIf the Delay Timer is set If using liquid detergents/tabletsStarting the wash programme Wash programme progress Washing cycle complete/removing the washing Programme Progress DisplayDetergent was used in the washing programme just com Programme Tables WashingSeparate Rinsing/Conditioning/Starching/Treating Separate SpinningMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpWhat to do if Trouble ShootingLow Machine is not level Machine is Water tap is not fully Turn the water tap on fully Opened If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterEmergency unlocking of the door When the water is completely drainedUnlock feature Supply firstHelpful to rinse with extra water To cancel the additional rinseAdditional rinse cycle RINSE+ To set the additional rinseAdditional rinse cycle and water cooling To cancel water coolingWater cooling To set the water cooling functionVariomatic spin To cancel Variomatic SpinTo set Variomatic Spin Cancelling the Programme Protection Setting the Programme ProtectionProgramme Protection Washing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingCover the hole with the cap G Installation-Site preparation Installation on a Suspended FloorLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Connection to the machineWater Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty conditions Great BritainPage Page Page Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG