Electrolux 88840 manual Starting the wash programme, If using liquid detergents/tablets

Page 25

Operating Instructions

3.Push the detergent dispenser drawer in fully

3 If using liquid detergents/tablets:

Add liquid detergent or tablets in the quantity recommended by the washing detergent manufacturer. Add liquid detergent with the dosage container provided by the detergent manufacturer.

Starting the wash programme

01. Check that the water tap is open.

2.Start the washing programme: press the START/PAUSE

button.

The washing programme is started or starts at the end of the time delay set.

3

If the DOOR/LIGHT display flashes red when the START/PAUSE button

 

is pressed, the door is not closed properly. Push the door firmly closed,

 

ensuring that there are no fabrics caught in the door and press the

 

START/PAUSE button again.

 

If the Delay Timer is set:

 

The time delay set begins to elapse and the time remaining until the

 

programme is due to start (in hours) is indicated on the Multi-display.

 

During this time, you can add more washing or change or cancel the

 

time delay.

 

• To add more washing, press the START/PAUSE button: the door can

 

then be opened. Then close the door and press the START/PAUSE

 

button again.

 

• To change or cancel the time delay, press the DELAY TIMER button re-

 

peatedly until the desired time is indicated on the display; when

 

the running time of the programme is displayed (in minutes, for ex-

 

ample,120) the washing programme begins immediately.

3

While the time delay is running, the washing machine goes into Stand-

 

by mode. Only WASH TIME remains lit and the Multi-display shows the

time remaining until the programme starts. All other indicators on the control panel go off in order to save energy. You can press any button to cancel the Stand-by mode.

25

Image 25
Contents ÖKO-LAVAMAT 88840 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control panelSilk / P Handwash Wool / P HandwashPRE-WASH Pre-wash/Soaking Programme option buttonsTime Saver Programmable functionsWash Time Display Consumption values and programme timesAnce spin detection and foam detection Anti-flood Aqua Control + Aqua Alarm What does Update mean?Preparing for a wash cycle Before the first washSorting and preparing the washing Types of washing and care symbols Water softening How much detergent and conditioner?Water hardness details Brief instructions Running a washing cycleAfter the washing programme has ended Bles Setting the wash programmeWOOL/PHandwash Selecting Spin Speed /Rinse HoldSILK/PHandwash Cannot be changedPress the PRE-WASH button Press the Delay Timer button Setting the Delay Timer/Soaking timeSoaking time Loading the washing Opening and closing the doorAutomatically after approximately 3 minutes For maximum loads, see Programme TablesCompartment for main wash deter- gent Adding detergent/conditionersCompartment for Pre-wash detergent Soaking agent Or for water softenerIf the Delay Timer is set If using liquid detergents/tabletsStarting the wash programme Wash programme progress Programme Progress Display Washing cycle complete/removing the washingDetergent was used in the washing programme just com Washing Programme TablesSeparate Spinning Separate Rinsing/Conditioning/Starching/TreatingMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingLow Machine is not level Machine is Water tap is not fully Turn the water tap on fully Opened If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingUnlock feature When the water is completely drainedEmergency unlocking of the door Supply firstAdditional rinse cycle RINSE+ To cancel the additional rinseHelpful to rinse with extra water To set the additional rinseWater cooling To cancel water coolingAdditional rinse cycle and water cooling To set the water cooling functionVariomatic spin To cancel Variomatic SpinTo set Variomatic Spin Cancelling the Programme Protection Setting the Programme ProtectionProgramme Protection Cancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsWhen transporting the unit with a sack trolley Installation of the applianceTransporting the appliance Remove transport packagingCover the hole with the cap G Installation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionConnection to the machine Inlet Hose ConnectionWater Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Warranty conditionsPage Page Page Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG