Installation and connection instructions
Inlet Hose Connection
A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a
–Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua Control.
–Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with Aqua Control.
Important! Never cut hoses into pieces in order to extend them!
3 | Sealing rings are supplied either in the plastic |
| nuts of the hose screw connection or in the |
enclosed pack. Do not use other seals! 0 1. Connect the hose with the angled
connection to the machine.
Important!
– Do not lay the inlet hose verti- cally downwards. Instead, turn it to the right or left as shown in the diagram.
– Tighten firmly to prevent leakage but do not use excessive force.
2. Connect the hose with a straight connection to a water tap with a screw thread R 3/4 (inches). Important! Only tighten the screw connection manually.
3. By slowly opening the water tap before putting the washing machine into operation it is possible to check that the connection is free of leaks.
54