Electrolux 88840 manual Carrying out an emergency emptying

Page 39

Operating Instructions

Carrying out an emergency emptying

If the washing machine no longer pumps out the water, emergency emptying must be carried out.

If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose.

1Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying.

Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before you carry out the emergency emptying.

01. Have a flat container on hand to catch the water.

2. Pull down the flap in the right corner of the base strip outwards and pull it off.

3. Remove the emergency emptying hose from its holder.

4. Place the container under the hose.

5. Detach the plug of the emergency emp- tying hose by turning it anticlockwise and pull it out.

The water runs out. Depending on the amount of water, it may be necessary to empty the collecting vessel several

times. To do this, close the emergency emptying hose temporarily with the plug.

Discard the water from the container, replace it under the emergency emptying hose and remove the plug from the hose.

39

Image 39
Contents ÖKO-LAVAMAT 88840 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDescription of the Appliance Front viewDetergent dispenser drawer Programme selector Control panelSilk / P Handwash Wool / P HandwashPRE-WASH Pre-wash/Soaking Programme option buttonsTime Saver Programmable functionsConsumption values and programme times Wash Time DisplayAnce spin detection and foam detection Anti-flood Aqua Control + Aqua Alarm What does Update mean?Before the first wash Preparing for a wash cycleSorting and preparing the washing Types of washing and care symbols How much detergent and conditioner? Water softeningWater hardness details Running a washing cycle Brief instructionsAfter the washing programme has ended Bles Setting the wash programmeCannot be changed Selecting Spin Speed /Rinse HoldWOOL/PHandwash SILK/PHandwashSetting the Delay Timer/Soaking time Press the PRE-WASH button Press the Delay Timer buttonSoaking time For maximum loads, see Programme Tables Opening and closing the doorLoading the washing Automatically after approximately 3 minutesOr for water softener Adding detergent/conditionersCompartment for main wash deter- gent Compartment for Pre-wash detergent Soaking agentIf using liquid detergents/tablets If the Delay Timer is setStarting the wash programme Wash programme progress Programme Progress Display Washing cycle complete/removing the washingDetergent was used in the washing programme just com Washing Programme TablesSeparate Spinning Separate Rinsing/Conditioning/Starching/TreatingMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpTrouble Shooting What to do ifLow Machine is not level Machine is Water tap is not fully Turn the water tap on fully Opened If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingSupply first When the water is completely drainedUnlock feature Emergency unlocking of the doorTo set the additional rinse To cancel the additional rinseAdditional rinse cycle RINSE+ Helpful to rinse with extra waterTo set the water cooling function To cancel water coolingWater cooling Additional rinse cycle and water coolingTo cancel Variomatic Spin Variomatic spinTo set Variomatic Spin Setting the Programme Protection Cancelling the Programme ProtectionProgramme Protection Started Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap G Installation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionConnection to the machine Inlet Hose ConnectionWater Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Warranty conditionsPage Page Page Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG