JVC LVT0858-001A manual Connecting the Power Cord

Page 13

VCR

TV

STB

DVD Player

STANDBY ON

For an analogue decoder

To watch or record a scrambled program on your VCR, connect the analogue decoder to your VCR and select the scrambled channel on your VCR.

If there is not an appropriate terminal for the decoder on your VCR, connect the decoder to your TV.

Refer also to the manuals supplied with these equipments.

For recording pictures from STB

When you connect a STB and a VCR directly with a SCART cable, you can enjoy recording the pictures from the STB onto VCR without using menu screens of STB. For details, refer also to the manuals supplied with the STB.

For digital sounds

•To enjoy the DVD software encoded with Dolby Digital or DTS Digital Surround, connect the DVD player using one of the DIGITAL IN terminals (see page 7).

•To enjoy the digital sounds, use both the SCART cable connection and the digital connection (see page 7).

Getting Started

For TV and video format

When the TV is equipped with the plural SCART terminals, refer to the manual supplied with the TV to check the available video signals for each terminal, then connect SCART cable correctly.

This unit cannot convert the video signals (S-video or Composite). When the video signal of one video component is different from that of the other (for example, one is

S-video, the other is Composite), you may not see the pictures appropriately. In this case, unify the video signals of all the video components into S-video or Composite, or you need to switch the video signal of TV each time you change the source.

For T-V LINK

•You can use T-V LINK function if you connect the T-V LINK compatible TV and VCR to this unit with a fully wired SCART cables. For details on T-V LINK, refer also to the manuals supplied with the TV and the VCR.

•Connect SCART cable to EXT-2 terminal on your JVC’s T-V LINK compatible TV for T-V LINK function.

•Some TV, VCR, STB and DVD player support this type of data communication. For complete details, refer also to the manuals supplied with these equipments.

Connecting the Power Cord

Before plugging the power cord into an AC outlet, make sure that all connections have been made.

Plug the power cord into an AC outlet.

Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference. We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.

Note:

The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:

–When you unplug the power cord.

–When a power failure occurs.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents RX-E111RSL / RX-E112RSL If in Doubt Consult a Competent Electrician RX-E111RSL RX-E112RSL Above ALL Table of Contents Parts Identification Remote Control7 8 9 p Front PanelChecking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Getting Started Connecting the FM and AM MW/LW AntennasFM Antenna supplied AntennaConnecting the front, center, and rear speakers Connecting the SpeakersConnecting the subwoofer speaker AM MW/LW antenna connectionRX-E111R RX-E112R Speaker Layout DiagramDigital connections Connecting Audio/Video ComponentsAnalogue ConnectionsVideo VCR STB DVD AudioVideo RGB Audio OUTConnecting the Power Cord Adjust the Volume Turn On the PowerBasic Operations Select the Source to PlaySignal and speaker indicators on the display Basic adjustment of auto memoryActivating TV Direct Press TV DirectTurning Off the Sounds Basic OperationsTemporarily-Muting Changing the Display BrightnessSetting the Digital Input Basic SettingsSelecting the Analogue or Digital Input Mode Digital in TerminalsSetting Input ANALOG/DIGITAL Basic SettingsControl ∞/ 3/ 2 DisplayInformation Setting the SpeakersPress Control ∞ or 5 repeatedly until Current setting* appears on the displayPress Control 3 or 2 to select the distance Speaker Distance-FRNT D, Cntr D, Rear DCrossover Frequency-CROSS Press Control 3 or 2 to select the LFE attenuator levelLow Frequency Effect Attenuator-LFE Dynamic Range Compression-D.COMPOFF Press Control 3 or 2 to select on or∞ /3 /2 DisplayTo cancel Auto Surround Setting the Auto Function ModePress Control 3 or 2 to select AUTO1 or AUTO2 Repeat steps 1 and 2, then select OFF in stepPress Control 3 or 2 to adjust the front speaker balance Sound AdjustmentsAdjusting the Front Speakers Press AdjustReinforcing the Bass Adjusting the ToneAdjusting the Subwoofer Output Level Sound AdjustmentsPress Control 3 or 2 to adjust the sound Output level AdjustmentsEx. When selecting the FM band Tuning into Stations ManuallyTuner Operations Press FM/AM to select the bandTo erase a stored preset station Using Preset TuningTuner Operations Press MemoryTo tune in a preset station Selecting the FM Reception ModeTo restore the stereo effect Channel number you wantWhat information can RDS signals provide? Using the RDS Radio DataSystem to Receive FM StationsPress PTY Search while listening To an FM station Set RDS/DVD Menu selector to RDS. RDSPress PTY 9 or PTY until PTY code you want appears On the display, while PTY Select is flashingJazz music Description of the PTY codesProgram Switching to BroadcastYour Choice Temporarily Press TA/NEWS/INFO repeatedlyDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1-channel reproductionAll Channel Stereo reproduction DAP Digital Acoustic Processor modes All Channel StereoCreating sound field HallAbout Relations between Speaker Layout and Surround Modes Creating Realistic Sound FieldsTurning on or off the Surround modes Selecting the Surround modesExcept for the digital multichannel Surround modePL II Music according to a playing source Press Test to check the speaker output balanceTo cancel Surround Mode Adjust the following speaker output levels from -10 to +10Press Test again to stop the test tone Press SoundAdjust the rear speaker output levels from -10 to +10 Using DAP Modes and All Channel Stereo Remote ControlTo cancel DAP Modes and All Channel Stereo Only for ALL CH ST. to adjust the center speaker levelPanorama control ON/OFF ModeRepeat steps 5 and 6 to adjust the other settings Press Control 3 or 2 to make adjustmentsUsing DAP Modes and All Channel Stereo Front Panel Repeat steps 5 and 6 to make other adjustmentsAdjusting the volume-VOLUME buttons Turning on the power-POWER buttonsMastering Remote Operations Reinforcing the Bass-BASS Boost buttonOperating RDS Adjusting the sound and operating tuner -10 keysSelecting the channels-10 keys Operating DVD menu for JVC’s DVD player Mastering Remote OperationsThese buttons work only for TV operations Manufacturers’ codes for DVD player Codes Try to operate your DVD player by pressingTry to operate your STB by pressing STB Manufacturers’ codes for STB CodesManufacturers’ codes for VCR Codes If there are more than one code listed for your brand of TVCGM Try to operate your TV by pressing TVProblem Possible Cause Solution TroubleshootingOperations To be on the NextTroubleshooting Amplifier SpecificationsTuning Range KHz to SpecificationsFM tuner IHF AM MW/LW tuner0102NHMMDWJEIN

LVT0858-001A specifications

The JVC LVT0858-001A is a versatile and well-engineered speaker system designed for optimal audio performance and user satisfaction. Built with high-quality materials and advanced technologies, this speaker is perfect for enhancing the sound quality of your home entertainment setup.

One of the main features of the LVT0858-001A is its impressive sound output. The speaker is equipped with a robust driver that delivers clear and powerful audio across a wide frequency range. This allows listeners to experience the intricacies of their favorite music, movies, and games with exceptional clarity and depth. The precise engineering of the speaker ensures minimal distortion, allowing for an immersive listening experience.

The design of the JVC LVT0858-001A is sleek and modern, making it an attractive addition to any room. Its compact form factor allows it to fit seamlessly into various environments, whether placed on a shelf, mounted on the wall, or paired with a home theater system. The speaker's aesthetic, combined with its performance, makes it suitable for diverse applications, from casual listening to serious audiophile setups.

One of the standout technologies featured in the LVT0858-001A is its enhanced bass response. The speaker is designed with a dedicated subwoofer that deepens low-frequency sounds, ensuring that users can feel the pulse of the music or the rumble of action in films. This technology not only adds to the overall audio experience but also highlights the subtlety in soundtracks that might otherwise go unnoticed.

Additionally, the JVC LVT0858-001A is compatible with a variety of audio sources. Whether connecting through Bluetooth, HDMI, or traditional wired options, users can easily integrate the speaker into their existing audio systems. This flexibility enhances its functionality, making it a great choice for both casual users and audio enthusiasts alike.

In conclusion, the JVC LVT0858-001A speaker system combines advanced technologies, a sleek design, and exceptional sound quality. With features aimed at delivering an immersive audio experience, it stands out as a reliable option for anyone looking to elevate their sound experience. Whether for music, movies, or gaming, this speaker is engineered to satisfy even the most discerning listeners.
Top Page Image Contents