JVC LVT0858-001A manual Press Control 3 or 2 to make adjustments

Page 41

6Press CONTROL 3 (or 2) to make adjustments.

•When adjusting the speaker output levels, make adjustments so that the sound level of the selected speaker is set at the

same level as that of the front speakers.

CONTROL

ANALOG

L

C

R

PR ΙΙ

 

LPCM

SUBWFR LFE DSP

 

DOLBY D

LS

S

RS

AUTO SR

VOL

DTS

INPUT ATT

Ex.: When adjusting the center speaker output level.

7Repeat steps 5 and 6 to adjust the other settings.

To cancel Surround Mode

Press SURROUND ON/OFF again so that “STEREO” appears on the display.

•If Surround mode is canceled while playing back multichannel digital software, all channel signals are mixed and output through the front speakers (and subwoofer if you have connected a subwoofer and set the subwoofer setting correctly—“YES”).

Using DAP Modes and All Channel Stereo (Front Panel)

Once you have adjusted the DAP modes and All Channel Stereo, the adjustment is memorized for each source.

•You cannot use the DAP modes and All Channel Stereo if no rear speakers are connected.

•You cannot adjust the effect level for “ALL CH ST.”

1Start playing 2-channel software—either digital or analogue—and select the source.

2Press SURROUND ON/OFF to activate Surround

mode.

When Surround mode turns on, the last selected Surround mode will be activated.

•Each time you press the button, Surround mode turns on and off alternately.

4Press ADJUST.

ADJUST

The CONTROL buttons now work for sound

 

adjustments.

5Press CONTROL ∞ (or 5) repeatedly until one of the following indications (with the current

setting)* appears.

CONTROL

 

ANALOG

L

C

R

PR ΙΙ

 

 

 

 

 

 

LPCM

SUBWFR LFE DSP

 

 

 

 

 

 

DOLBY D

LS

S

RS

AUTO SR

 

 

VOL

 

 

 

DTS

INPUT ATT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CENTER (only for “All CH ST.”) :

To adjust the center speaker output level (from –10 to +10).

REAR L : To adjust the left rear speaker output level (from –10 to +10).

REAR R : To adjust the right rear speaker output level (from –10 to +10).

EFFECT (except “All CH ST.”) :

To adjust the DAP effect level.

As the number increases, the effect becomes stronger (normally set it to “EFFECT 3”).

*“0” is the initial setting for the speaker output levels, and “EFFECT 3” is for the DAP effect level.

If you have already changed the setting, another setting will be shown.

6Press CONTROL 3 (or 2) to make adjustments.

•When adjusting the speaker output levels, make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers.

CONTROL

Creating Realistic Sound Fields

SURROUND

 

ANALOG

L

C

R

PR ΙΙ

 

 

LPCM

SUBWFR LFE DSP

 

ON/OFF

Ι

 

 

 

DOLBY D

LS

S

RS

AUTO SR

VOL

 

R

DTS

INPUT ATT

 

 

 

 

 

 

 

 

TT

VOL

 

 

 

 

 

Ex.: “LIVE CLUB” has been selected.

3Press SURROUND MODE repeatedly until one of the DAP modes or “ALL CH ST.” you like to

apply appears on the display.

The DSP indicator also lights up on the display.

SURROUND

 

 

 

MODE

C

R

PR ΙΙ

 

ANALOG

L

 

LPCM

SUBWFR LFE DSP

 

DOLBY D

LS

S

RS

AUTO SR

VOL

DTS

INPUT ATT

Ex.: When adjusting the left rear speaker output level.

7Repeat steps 5 and 6 to make other adjustments.

To cancel DAP Modes and All Channel Stereo

Press SURROUND ON/OFF so that “STEREO” appears on the display. The DSP indicator goes off.

(back to the beginning)

37

Page 40 Page 42
Image 41
Page 40 Page 42
Contents RX-E111RSL / RX-E112RSL If in Doubt Consult a Competent Electrician RX-E111RSL RX-E112RSL Above ALL Table of Contents Parts Identification Remote Control7 8 9 p Front PanelGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting Started Connecting the FM and AM MW/LW AntennasFM Antenna supplied AntennaConnecting the front, center, and rear speakers Connecting the SpeakersConnecting the subwoofer speaker AM MW/LW antenna connectionRX-E111R RX-E112R Speaker Layout DiagramDigital connections Connecting Audio/Video ComponentsAnalogue ConnectionsVideo VCR STB DVD AudioVideo RGB Audio OUTConnecting the Power Cord Adjust the Volume Turn On the PowerBasic Operations Select the Source to PlaySignal and speaker indicators on the display Basic adjustment of auto memoryActivating TV Direct Press TV DirectTurning Off the Sounds Basic OperationsTemporarily-Muting Changing the Display BrightnessSetting the Digital Input Basic SettingsSelecting the Analogue or Digital Input Mode Digital in TerminalsSetting Input ANALOG/DIGITAL Basic SettingsControl ∞/ 3/ 2 DisplayInformation Setting the SpeakersPress Control ∞ or 5 repeatedly until Current setting* appears on the displayPress Control 3 or 2 to select the distance Speaker Distance-FRNT D, Cntr D, Rear DCrossover Frequency-CROSS Press Control 3 or 2 to select the LFE attenuator levelLow Frequency Effect Attenuator-LFE Dynamic Range Compression-D.COMPOFF Press Control 3 or 2 to select on or∞ /3 /2 DisplayTo cancel Auto Surround Setting the Auto Function ModePress Control 3 or 2 to select AUTO1 or AUTO2 Repeat steps 1 and 2, then select OFF in stepPress Control 3 or 2 to adjust the front speaker balance Sound AdjustmentsAdjusting the Front Speakers Press AdjustReinforcing the Bass Adjusting the ToneAdjusting the Subwoofer Output Level Sound AdjustmentsPress Control 3 or 2 to adjust the sound Output level AdjustmentsEx. When selecting the FM band Tuning into Stations ManuallyTuner Operations Press FM/AM to select the bandTo erase a stored preset station Using Preset TuningTuner Operations Press MemoryTo tune in a preset station Selecting the FM Reception ModeTo restore the stereo effect Channel number you wantWhat information can RDS signals provide? Using the RDS Radio DataSystem to Receive FM StationsPress PTY Search while listening To an FM station Set RDS/DVD Menu selector to RDS. RDSPress PTY 9 or PTY until PTY code you want appears On the display, while PTY Select is flashingJazz music Description of the PTY codesProgram Switching to BroadcastYour Choice Temporarily Press TA/NEWS/INFO repeatedlyDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1-channel reproductionAll Channel Stereo reproduction DAP Digital Acoustic Processor modes All Channel StereoCreating sound field HallAbout Relations between Speaker Layout and Surround Modes Creating Realistic Sound FieldsTurning on or off the Surround modes Selecting the Surround modesExcept for the digital multichannel Surround modePL II Music according to a playing source Press Test to check the speaker output balanceTo cancel Surround Mode Adjust the following speaker output levels from -10 to +10Press Test again to stop the test tone Press SoundAdjust the rear speaker output levels from -10 to +10 Using DAP Modes and All Channel Stereo Remote ControlTo cancel DAP Modes and All Channel Stereo Only for ALL CH ST. to adjust the center speaker levelPanorama control ON/OFF ModeRepeat steps 5 and 6 to adjust the other settings Press Control 3 or 2 to make adjustmentsUsing DAP Modes and All Channel Stereo Front Panel Repeat steps 5 and 6 to make other adjustmentsAdjusting the volume-VOLUME buttons Turning on the power-POWER buttonsMastering Remote Operations Reinforcing the Bass-BASS Boost buttonSelecting the channels-10 keys Adjusting the sound and operating tuner -10 keysOperating RDS These buttons work only for TV operations Mastering Remote OperationsOperating DVD menu for JVC’s DVD player Manufacturers’ codes for DVD player Codes Try to operate your DVD player by pressingTry to operate your STB by pressing STB Manufacturers’ codes for STB CodesManufacturers’ codes for VCR Codes If there are more than one code listed for your brand of TVCGM Try to operate your TV by pressing TVProblem Possible Cause Solution TroubleshootingOperations To be on the NextTroubleshooting Amplifier SpecificationsTuning Range KHz to SpecificationsFM tuner IHF AM MW/LW tuner0102NHMMDWJEIN

LVT0858-001A specifications

The JVC LVT0858-001A is a versatile and well-engineered speaker system designed for optimal audio performance and user satisfaction. Built with high-quality materials and advanced technologies, this speaker is perfect for enhancing the sound quality of your home entertainment setup.

One of the main features of the LVT0858-001A is its impressive sound output. The speaker is equipped with a robust driver that delivers clear and powerful audio across a wide frequency range. This allows listeners to experience the intricacies of their favorite music, movies, and games with exceptional clarity and depth. The precise engineering of the speaker ensures minimal distortion, allowing for an immersive listening experience.

The design of the JVC LVT0858-001A is sleek and modern, making it an attractive addition to any room. Its compact form factor allows it to fit seamlessly into various environments, whether placed on a shelf, mounted on the wall, or paired with a home theater system. The speaker's aesthetic, combined with its performance, makes it suitable for diverse applications, from casual listening to serious audiophile setups.

One of the standout technologies featured in the LVT0858-001A is its enhanced bass response. The speaker is designed with a dedicated subwoofer that deepens low-frequency sounds, ensuring that users can feel the pulse of the music or the rumble of action in films. This technology not only adds to the overall audio experience but also highlights the subtlety in soundtracks that might otherwise go unnoticed.

Additionally, the JVC LVT0858-001A is compatible with a variety of audio sources. Whether connecting through Bluetooth, HDMI, or traditional wired options, users can easily integrate the speaker into their existing audio systems. This flexibility enhances its functionality, making it a great choice for both casual users and audio enthusiasts alike.

In conclusion, the JVC LVT0858-001A speaker system combines advanced technologies, a sleek design, and exceptional sound quality. With features aimed at delivering an immersive audio experience, it stands out as a reliable option for anyone looking to elevate their sound experience. Whether for music, movies, or gaming, this speaker is engineered to satisfy even the most discerning listeners.
Top Page Image Contents