JVC LVT0858-001A manual RX-E111RSL RX-E112RSL

Page 3

CAUTION

•Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

•Do not place any naked flame sources, such as lighted candles, on the apparatus.

•When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage. Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Wall or

obstructions

Spacing 15 cm or more

RX-E111RSL/

RX-E112RSL

Front

Stand height

15 cm or more

Floor

G-2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents RX-E111RSL / RX-E112RSL If in Doubt Consult a Competent Electrician RX-E111RSL RX-E112RSL Above ALL Table of Contents Front Panel Remote ControlParts Identification 7 8 9 pBefore Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Antenna Connecting the FM and AM MW/LW AntennasGetting Started FM Antenna suppliedAM MW/LW antenna connection Connecting the SpeakersConnecting the front, center, and rear speakers Connecting the subwoofer speakerRX-E111R RX-E112R Speaker Layout DiagramConnections Connecting Audio/Video ComponentsDigital connections AnalogueRGB Audio OUT VCR STB DVD AudioVideo VideoConnecting the Power Cord Select the Source to Play Turn On the PowerAdjust the Volume Basic OperationsPress TV Direct Basic adjustment of auto memorySignal and speaker indicators on the display Activating TV DirectChanging the Display Brightness Basic OperationsTurning Off the Sounds Temporarily-MutingDigital in Terminals Basic SettingsSetting the Digital Input Selecting the Analogue or Digital Input Mode∞/ 3/ 2 Display Basic SettingsSetting Input ANALOG/DIGITAL ControlInformation Setting the SpeakersSpeaker Distance-FRNT D, Cntr D, Rear D Current setting* appears on the displayPress Control ∞ or 5 repeatedly until Press Control 3 or 2 to select the distanceDynamic Range Compression-D.COMP Press Control 3 or 2 to select the LFE attenuator levelCrossover Frequency-CROSS Low Frequency Effect Attenuator-LFEDisplay Press Control 3 or 2 to select on orOFF ∞ /3 /2Repeat steps 1 and 2, then select OFF in step Setting the Auto Function ModeTo cancel Auto Surround Press Control 3 or 2 to select AUTO1 or AUTO2Press Adjust Sound AdjustmentsPress Control 3 or 2 to adjust the front speaker balance Adjusting the Front SpeakersReinforcing the Bass Adjusting the ToneAdjustments Sound AdjustmentsAdjusting the Subwoofer Output Level Press Control 3 or 2 to adjust the sound Output levelPress FM/AM to select the band Tuning into Stations ManuallyEx. When selecting the FM band Tuner OperationsPress Memory Using Preset TuningTo erase a stored preset station Tuner OperationsChannel number you want Selecting the FM Reception ModeTo tune in a preset station To restore the stereo effectFM Stations Using the RDS Radio DataWhat information can RDS signals provide? System to ReceiveOn the display, while PTY Select is flashing Set RDS/DVD Menu selector to RDS. RDSPress PTY Search while listening To an FM station Press PTY 9 or PTY until PTY code you want appearsJazz music Description of the PTY codesPress TA/NEWS/INFO repeatedly Switching to BroadcastProgram Your Choice TemporarilyTypical Multichannel 5.1-channel reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundHall DAP Digital Acoustic Processor modes All Channel StereoAll Channel Stereo reproduction Creating sound fieldSelecting the Surround modes Creating Realistic Sound FieldsAbout Relations between Speaker Layout and Surround Modes Turning on or off the Surround modesPress Test to check the speaker output balance Surround modeExcept for the digital multichannel PL II Music according to a playing sourcePress Sound Adjust the following speaker output levels from -10 to +10To cancel Surround Mode Press Test again to stop the test toneOnly for ALL CH ST. to adjust the center speaker level Using DAP Modes and All Channel Stereo Remote ControlAdjust the rear speaker output levels from -10 to +10 To cancel DAP Modes and All Channel StereoPanorama control ON/OFF ModeRepeat steps 5 and 6 to make other adjustments Press Control 3 or 2 to make adjustmentsRepeat steps 5 and 6 to adjust the other settings Using DAP Modes and All Channel Stereo Front PanelReinforcing the Bass-BASS Boost button Turning on the power-POWER buttonsAdjusting the volume-VOLUME buttons Mastering Remote OperationsAdjusting the sound and operating tuner -10 keys Operating RDSSelecting the channels-10 keys Mastering Remote Operations Operating DVD menu for JVC’s DVD playerThese buttons work only for TV operations Manufacturers’ codes for STB Codes Try to operate your DVD player by pressingManufacturers’ codes for DVD player Codes Try to operate your STB by pressing STBTry to operate your TV by pressing TV If there are more than one code listed for your brand of TVManufacturers’ codes for VCR Codes CGMTo be on the Next TroubleshootingProblem Possible Cause Solution OperationsTroubleshooting Amplifier SpecificationsAM MW/LW tuner SpecificationsTuning Range KHz to FM tuner IHF0102NHMMDWJEIN

LVT0858-001A specifications

The JVC LVT0858-001A is a versatile and well-engineered speaker system designed for optimal audio performance and user satisfaction. Built with high-quality materials and advanced technologies, this speaker is perfect for enhancing the sound quality of your home entertainment setup.

One of the main features of the LVT0858-001A is its impressive sound output. The speaker is equipped with a robust driver that delivers clear and powerful audio across a wide frequency range. This allows listeners to experience the intricacies of their favorite music, movies, and games with exceptional clarity and depth. The precise engineering of the speaker ensures minimal distortion, allowing for an immersive listening experience.

The design of the JVC LVT0858-001A is sleek and modern, making it an attractive addition to any room. Its compact form factor allows it to fit seamlessly into various environments, whether placed on a shelf, mounted on the wall, or paired with a home theater system. The speaker's aesthetic, combined with its performance, makes it suitable for diverse applications, from casual listening to serious audiophile setups.

One of the standout technologies featured in the LVT0858-001A is its enhanced bass response. The speaker is designed with a dedicated subwoofer that deepens low-frequency sounds, ensuring that users can feel the pulse of the music or the rumble of action in films. This technology not only adds to the overall audio experience but also highlights the subtlety in soundtracks that might otherwise go unnoticed.

Additionally, the JVC LVT0858-001A is compatible with a variety of audio sources. Whether connecting through Bluetooth, HDMI, or traditional wired options, users can easily integrate the speaker into their existing audio systems. This flexibility enhances its functionality, making it a great choice for both casual users and audio enthusiasts alike.

In conclusion, the JVC LVT0858-001A speaker system combines advanced technologies, a sleek design, and exceptional sound quality. With features aimed at delivering an immersive audio experience, it stands out as a reliable option for anyone looking to elevate their sound experience. Whether for music, movies, or gaming, this speaker is engineered to satisfy even the most discerning listeners.
Top Page Image Contents