JVC LVT0858-001A manual Above ALL

Page 4

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case -this could result in a fatal electrical shock.;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

G-3

Image 4
Contents RX-E111RSL / RX-E112RSL If in Doubt Consult a Competent Electrician RX-E111RSL RX-E112RSL Above ALL Table of Contents Remote Control Parts Identification7 8 9 p Front PanelChecking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Connecting the FM and AM MW/LW Antennas Getting StartedFM Antenna supplied AntennaConnecting the Speakers Connecting the front, center, and rear speakersConnecting the subwoofer speaker AM MW/LW antenna connectionSpeaker Layout Diagram RX-E111R RX-E112RConnecting Audio/Video Components Digital connectionsAnalogue ConnectionsVCR STB DVD Audio VideoVideo RGB Audio OUTConnecting the Power Cord Turn On the Power Adjust the VolumeBasic Operations Select the Source to PlayBasic adjustment of auto memory Signal and speaker indicators on the displayActivating TV Direct Press TV DirectBasic Operations Turning Off the SoundsTemporarily-Muting Changing the Display BrightnessBasic Settings Setting the Digital InputSelecting the Analogue or Digital Input Mode Digital in TerminalsBasic Settings Setting Input ANALOG/DIGITALControl ∞/ 3/ 2 DisplaySetting the Speakers InformationCurrent setting* appears on the display Press Control ∞ or 5 repeatedly untilPress Control 3 or 2 to select the distance Speaker Distance-FRNT D, Cntr D, Rear DPress Control 3 or 2 to select the LFE attenuator level Crossover Frequency-CROSSLow Frequency Effect Attenuator-LFE Dynamic Range Compression-D.COMPPress Control 3 or 2 to select on or OFF∞ /3 /2 DisplaySetting the Auto Function Mode To cancel Auto SurroundPress Control 3 or 2 to select AUTO1 or AUTO2 Repeat steps 1 and 2, then select OFF in stepSound Adjustments Press Control 3 or 2 to adjust the front speaker balanceAdjusting the Front Speakers Press AdjustAdjusting the Tone Reinforcing the BassSound Adjustments Adjusting the Subwoofer Output LevelPress Control 3 or 2 to adjust the sound Output level AdjustmentsTuning into Stations Manually Ex. When selecting the FM bandTuner Operations Press FM/AM to select the bandUsing Preset Tuning To erase a stored preset stationTuner Operations Press MemorySelecting the FM Reception Mode To tune in a preset stationTo restore the stereo effect Channel number you wantUsing the RDS Radio Data What information can RDS signals provide?System to Receive FM StationsSet RDS/DVD Menu selector to RDS. RDS Press PTY Search while listening To an FM stationPress PTY 9 or PTY until PTY code you want appears On the display, while PTY Select is flashingDescription of the PTY codes Jazz musicSwitching to Broadcast ProgramYour Choice Temporarily Press TA/NEWS/INFO repeatedlyCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1-channel reproductionDAP Digital Acoustic Processor modes All Channel Stereo All Channel Stereo reproductionCreating sound field HallCreating Realistic Sound Fields About Relations between Speaker Layout and Surround ModesTurning on or off the Surround modes Selecting the Surround modesSurround mode Except for the digital multichannelPL II Music according to a playing source Press Test to check the speaker output balanceAdjust the following speaker output levels from -10 to +10 To cancel Surround ModePress Test again to stop the test tone Press SoundUsing DAP Modes and All Channel Stereo Remote Control Adjust the rear speaker output levels from -10 to +10To cancel DAP Modes and All Channel Stereo Only for ALL CH ST. to adjust the center speaker levelON/OFF Mode Panorama controlPress Control 3 or 2 to make adjustments Repeat steps 5 and 6 to adjust the other settingsUsing DAP Modes and All Channel Stereo Front Panel Repeat steps 5 and 6 to make other adjustmentsTurning on the power-POWER buttons Adjusting the volume-VOLUME buttonsMastering Remote Operations Reinforcing the Bass-BASS Boost buttonOperating RDS Adjusting the sound and operating tuner -10 keysSelecting the channels-10 keys Operating DVD menu for JVC’s DVD player Mastering Remote OperationsThese buttons work only for TV operations Try to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesTry to operate your STB by pressing STB Manufacturers’ codes for STB CodesIf there are more than one code listed for your brand of TV Manufacturers’ codes for VCR CodesCGM Try to operate your TV by pressing TVTroubleshooting Problem Possible Cause SolutionOperations To be on the NextTroubleshooting Specifications AmplifierSpecifications Tuning Range KHz toFM tuner IHF AM MW/LW tuner0102NHMMDWJEIN

LVT0858-001A specifications

The JVC LVT0858-001A is a versatile and well-engineered speaker system designed for optimal audio performance and user satisfaction. Built with high-quality materials and advanced technologies, this speaker is perfect for enhancing the sound quality of your home entertainment setup.

One of the main features of the LVT0858-001A is its impressive sound output. The speaker is equipped with a robust driver that delivers clear and powerful audio across a wide frequency range. This allows listeners to experience the intricacies of their favorite music, movies, and games with exceptional clarity and depth. The precise engineering of the speaker ensures minimal distortion, allowing for an immersive listening experience.

The design of the JVC LVT0858-001A is sleek and modern, making it an attractive addition to any room. Its compact form factor allows it to fit seamlessly into various environments, whether placed on a shelf, mounted on the wall, or paired with a home theater system. The speaker's aesthetic, combined with its performance, makes it suitable for diverse applications, from casual listening to serious audiophile setups.

One of the standout technologies featured in the LVT0858-001A is its enhanced bass response. The speaker is designed with a dedicated subwoofer that deepens low-frequency sounds, ensuring that users can feel the pulse of the music or the rumble of action in films. This technology not only adds to the overall audio experience but also highlights the subtlety in soundtracks that might otherwise go unnoticed.

Additionally, the JVC LVT0858-001A is compatible with a variety of audio sources. Whether connecting through Bluetooth, HDMI, or traditional wired options, users can easily integrate the speaker into their existing audio systems. This flexibility enhances its functionality, making it a great choice for both casual users and audio enthusiasts alike.

In conclusion, the JVC LVT0858-001A speaker system combines advanced technologies, a sleek design, and exceptional sound quality. With features aimed at delivering an immersive audio experience, it stands out as a reliable option for anyone looking to elevate their sound experience. Whether for music, movies, or gaming, this speaker is engineered to satisfy even the most discerning listeners.