JVC LVT0858-001A manual Switching to Broadcast, Program, Your Choice Temporarily

Page 33

Switching to Broadcast

Remote

Program of

ONLY

Your Choice Temporarily

 

Another convenient RDS service is called “Enhanced Other Network.”

This allows the unit to switch temporarily to a broadcast program of your choice (TA, NEWS, and/or INFO) from a different station except in the following cases:

•When you are listening to non-RDS stations (all AM—MW/LW stations, some FM stations and other sources).

•When the unit is in standby mode or in TV Direct.

Before you start, remember...

The Enhanced Other Network function is only applicable to preset stations.

1Set RDS/DVD MENU selector to “RDS.” RDS

DVD

MENU

2Press TA/NEWS/INFO repeatedly

CASE 2

If the FM station you are listening to is broadcasting the program you have selected

The unit continues to receive the station but the indicator of received PTY code starts flashing.

«

When the program is over, the indicator of received PTY code stops flashing and remains lit, but the Enhanced Other Network function still remains activated.

To stop listening to the program selected by Enhanced Other Network.

Press TA/NEWS/INFO repeatedly again so that the program type (TA/NEWS/INFO) indicator goes off from the display. The unit exits from Enhanced Other Network standby mode and goes back to the previously selected station.

When an emergency broadcast (ALARM signal) is sent from an FM station.

Tuner Operations

until the program type you want appears on the display.

TA/NEWS/INFO

The unit automatically tunes in the station except in the following cases:

• When you are listening to non-RDS stations (all AM—MW/LW

•Each time you press the button, the display changes to show the following:

TA NEWS INFO TA/NEWS TA/INFO

None TA/NEWS/INFO NEWS/INFO

TA : Traffic Announcement in your area.

NEWS : News.

INFO : Program the purpose of which is to impart advice in the widest sense.

How the Enhanced Other Network function actually works:

CASE 1

If there is no station broadcasting the program you have selected

The unit continues tuning in the current station.

«

When a station starts broadcasting the program you have selected, the unit automatically switches to the station. The indicator of received PTY code starts flashing.

«

When the program is over, the unit goes back to the previously tuned station, but the Enhanced Other Network function still remains activated.

stations, some FM stations and other sources).

• When the unit is in standby mode or TV Direct.

While receiving an emergency broadcast, “ALARM” appears on the display.

The TEST signal is used for equipment test—whether it can receive the ALARM signal correctly.

The TEST signal makes the unit work in the same way as the ALARM signal does. If the TEST signal is received, the unit automatically switches to the station broadcasting the TEST signal. While receiving the TEST signal, “TEST” appears on the display.

Notes:

•Enhanced Other Network data sent from some stations may not be compatible with this unit.

•Enhanced Other Network does not function for some FM stations with RDS service.

•While listening to a program tuned in by the Enhanced Other Network function, the station does not change even if another network station starts broadcasting a program of the same Enhanced Other Network data.

•While listening to a program tuned in by the Enhanced Other Network function, you can only use the TA/NEWS/INFO and DISPLAY MODE as the tuner operation buttons.

•If the stations alternate intermittently between the station tuned by the Enhanced Other Network function and the currently tuned station, press TA/NEWS/INFO repeatedly to cancel the Enhanced Other Network function.

If you do not press the button, the currently tuned station is received finally, and the indication of the Enhanced Other Network data type flashing on the display disappears.

29

Page 32 Page 34
Image 33
Page 32 Page 34
Contents RX-E111RSL / RX-E112RSL If in Doubt Consult a Competent Electrician RX-E111RSL RX-E112RSL Above ALL Table of Contents Parts Identification Remote Control7 8 9 p Front PanelBefore Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Getting Started Connecting the FM and AM MW/LW AntennasFM Antenna supplied AntennaConnecting the front, center, and rear speakers Connecting the SpeakersConnecting the subwoofer speaker AM MW/LW antenna connectionRX-E111R RX-E112R Speaker Layout DiagramDigital connections Connecting Audio/Video ComponentsAnalogue ConnectionsVideo VCR STB DVD AudioVideo RGB Audio OUTConnecting the Power Cord Adjust the Volume Turn On the PowerBasic Operations Select the Source to PlaySignal and speaker indicators on the display Basic adjustment of auto memoryActivating TV Direct Press TV DirectTurning Off the Sounds Basic OperationsTemporarily-Muting Changing the Display BrightnessSetting the Digital Input Basic SettingsSelecting the Analogue or Digital Input Mode Digital in TerminalsSetting Input ANALOG/DIGITAL Basic SettingsControl ∞/ 3/ 2 DisplayInformation Setting the SpeakersPress Control ∞ or 5 repeatedly until Current setting* appears on the displayPress Control 3 or 2 to select the distance Speaker Distance-FRNT D, Cntr D, Rear DCrossover Frequency-CROSS Press Control 3 or 2 to select the LFE attenuator levelLow Frequency Effect Attenuator-LFE Dynamic Range Compression-D.COMPOFF Press Control 3 or 2 to select on or∞ /3 /2 DisplayTo cancel Auto Surround Setting the Auto Function ModePress Control 3 or 2 to select AUTO1 or AUTO2 Repeat steps 1 and 2, then select OFF in stepPress Control 3 or 2 to adjust the front speaker balance Sound AdjustmentsAdjusting the Front Speakers Press AdjustReinforcing the Bass Adjusting the ToneAdjusting the Subwoofer Output Level Sound AdjustmentsPress Control 3 or 2 to adjust the sound Output level AdjustmentsEx. When selecting the FM band Tuning into Stations ManuallyTuner Operations Press FM/AM to select the bandTo erase a stored preset station Using Preset TuningTuner Operations Press MemoryTo tune in a preset station Selecting the FM Reception ModeTo restore the stereo effect Channel number you wantWhat information can RDS signals provide? Using the RDS Radio DataSystem to Receive FM StationsPress PTY Search while listening To an FM station Set RDS/DVD Menu selector to RDS. RDSPress PTY 9 or PTY until PTY code you want appears On the display, while PTY Select is flashingJazz music Description of the PTY codesProgram Switching to BroadcastYour Choice Temporarily Press TA/NEWS/INFO repeatedlyDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1-channel reproductionAll Channel Stereo reproduction DAP Digital Acoustic Processor modes All Channel StereoCreating sound field HallAbout Relations between Speaker Layout and Surround Modes Creating Realistic Sound FieldsTurning on or off the Surround modes Selecting the Surround modesExcept for the digital multichannel Surround modePL II Music according to a playing source Press Test to check the speaker output balanceTo cancel Surround Mode Adjust the following speaker output levels from -10 to +10Press Test again to stop the test tone Press SoundAdjust the rear speaker output levels from -10 to +10 Using DAP Modes and All Channel Stereo Remote ControlTo cancel DAP Modes and All Channel Stereo Only for ALL CH ST. to adjust the center speaker levelPanorama control ON/OFF ModeRepeat steps 5 and 6 to adjust the other settings Press Control 3 or 2 to make adjustmentsUsing DAP Modes and All Channel Stereo Front Panel Repeat steps 5 and 6 to make other adjustmentsAdjusting the volume-VOLUME buttons Turning on the power-POWER buttonsMastering Remote Operations Reinforcing the Bass-BASS Boost buttonAdjusting the sound and operating tuner -10 keys Operating RDSSelecting the channels-10 keys Mastering Remote Operations Operating DVD menu for JVC’s DVD playerThese buttons work only for TV operations Manufacturers’ codes for DVD player Codes Try to operate your DVD player by pressingTry to operate your STB by pressing STB Manufacturers’ codes for STB CodesManufacturers’ codes for VCR Codes If there are more than one code listed for your brand of TVCGM Try to operate your TV by pressing TVProblem Possible Cause Solution TroubleshootingOperations To be on the NextTroubleshooting Amplifier SpecificationsTuning Range KHz to SpecificationsFM tuner IHF AM MW/LW tuner0102NHMMDWJEIN

LVT0858-001A specifications

The JVC LVT0858-001A is a versatile and well-engineered speaker system designed for optimal audio performance and user satisfaction. Built with high-quality materials and advanced technologies, this speaker is perfect for enhancing the sound quality of your home entertainment setup.

One of the main features of the LVT0858-001A is its impressive sound output. The speaker is equipped with a robust driver that delivers clear and powerful audio across a wide frequency range. This allows listeners to experience the intricacies of their favorite music, movies, and games with exceptional clarity and depth. The precise engineering of the speaker ensures minimal distortion, allowing for an immersive listening experience.

The design of the JVC LVT0858-001A is sleek and modern, making it an attractive addition to any room. Its compact form factor allows it to fit seamlessly into various environments, whether placed on a shelf, mounted on the wall, or paired with a home theater system. The speaker's aesthetic, combined with its performance, makes it suitable for diverse applications, from casual listening to serious audiophile setups.

One of the standout technologies featured in the LVT0858-001A is its enhanced bass response. The speaker is designed with a dedicated subwoofer that deepens low-frequency sounds, ensuring that users can feel the pulse of the music or the rumble of action in films. This technology not only adds to the overall audio experience but also highlights the subtlety in soundtracks that might otherwise go unnoticed.

Additionally, the JVC LVT0858-001A is compatible with a variety of audio sources. Whether connecting through Bluetooth, HDMI, or traditional wired options, users can easily integrate the speaker into their existing audio systems. This flexibility enhances its functionality, making it a great choice for both casual users and audio enthusiasts alike.

In conclusion, the JVC LVT0858-001A speaker system combines advanced technologies, a sleek design, and exceptional sound quality. With features aimed at delivering an immersive audio experience, it stands out as a reliable option for anyone looking to elevate their sound experience. Whether for music, movies, or gaming, this speaker is engineered to satisfy even the most discerning listeners.
Top Page Image Contents