JVC LVT0858-001A manual Selecting the FM Reception Mode, Channel number you want, Mono

Page 29

To tune in a preset station

1Press FM/AM to select the band.

The last received station of the selected band is tuned in, and the CONTROL buttons now work for tuner operations.

FM/AM

TUNED ST AUTO MUTING

MHZ

R

T

VOL

Ex.: When selecting the FM band.

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station (see page 24).

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Tuner Operations

2 Press CONTROL ∞ (or 5) repeatedly until

1 While listening to an FM station, press

“< PRESET >” appears on the display.

CONTROL ∞ (or 5) repeatedly until

 

 

“< FM MODE >” appears on the display.

CONTROL

 

CONTROL

 

 

 

R ΙΙ

TUNED ST AUTO MUTING

 

 

 

 

O SR

R ΙΙ

TUNED

ST

AUTO MUTING

T ATT

VOL

 

 

 

 

O SR

 

 

 

 

T ATT

 

 

VOL

3 While “< PRESET >” still remains on the display,

2 Press CONTROL 3 (or 2) to select “MONO.”

press CONTROL 3 (or 2) to select a preset

 

• Each time you press the button, the FM reception mode

channel number you want.

 

alternates between “AUTO MUTING”* and “MONO.”

 

 

 

 

 

CONTROL

 

 

CONTROL

 

 

 

 

 

 

ANALOG

L C R PR ΙΙ

TUNED

 

 

 

 

 

 

 

 

LPCM

SUBWFR LFE DSP

 

 

TUNED ST AUTO MUTING

 

DOLBY D

LS S RS

AUTO SR

VOL

 

 

DTS

INPUT ATT

 

MHZ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VOL

•Pressing (or holding) CONTROL 3 increases the preset channel numbers.

•Pressing (or holding) CONTROL 2 decreases the preset channel numbers.

When using the remote control

1Press FM or AM.

The last received station of the selected band is tuned in, and the 10 keys now work for tuner operations.

2Press the 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 30, press +10, +10, then 10.

*“AUTO MUTING” is the initial setting. If you have already changed the setting, “MONO” will be shown.

AUTO MUTING : Normally select this.

When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

MONO

: Select this to improve the reception (but

 

stereo effect will be lost).

 

In this mode, you will hear noise while

 

tuning into the stations. The AUTO

 

MUTING indicator goes off from the

 

display. (The ST indicator also goes off.)

To restore the stereo effect

Repeat step 1, then select “AUTO MUTING” in step 2.

When using the remote control

1Press FM.

10 keys now work for tuner operations.

2Press FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”

25

Page 28 Page 30
Image 29
Page 28 Page 30
Contents RX-E111RSL / RX-E112RSL If in Doubt Consult a Competent Electrician RX-E111RSL RX-E112RSL Above ALL Table of Contents Parts Identification Remote Control7 8 9 p Front PanelGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting Started Connecting the FM and AM MW/LW AntennasFM Antenna supplied AntennaConnecting the front, center, and rear speakers Connecting the SpeakersConnecting the subwoofer speaker AM MW/LW antenna connectionRX-E111R RX-E112R Speaker Layout DiagramDigital connections Connecting Audio/Video ComponentsAnalogue ConnectionsVideo VCR STB DVD AudioVideo RGB Audio OUTConnecting the Power Cord Adjust the Volume Turn On the PowerBasic Operations Select the Source to PlaySignal and speaker indicators on the display Basic adjustment of auto memoryActivating TV Direct Press TV DirectTurning Off the Sounds Basic OperationsTemporarily-Muting Changing the Display BrightnessSetting the Digital Input Basic SettingsSelecting the Analogue or Digital Input Mode Digital in TerminalsSetting Input ANALOG/DIGITAL Basic SettingsControl ∞/ 3/ 2 DisplayInformation Setting the SpeakersPress Control ∞ or 5 repeatedly until Current setting* appears on the displayPress Control 3 or 2 to select the distance Speaker Distance-FRNT D, Cntr D, Rear DCrossover Frequency-CROSS Press Control 3 or 2 to select the LFE attenuator levelLow Frequency Effect Attenuator-LFE Dynamic Range Compression-D.COMPOFF Press Control 3 or 2 to select on or∞ /3 /2 DisplayTo cancel Auto Surround Setting the Auto Function ModePress Control 3 or 2 to select AUTO1 or AUTO2 Repeat steps 1 and 2, then select OFF in stepPress Control 3 or 2 to adjust the front speaker balance Sound AdjustmentsAdjusting the Front Speakers Press AdjustReinforcing the Bass Adjusting the ToneAdjusting the Subwoofer Output Level Sound AdjustmentsPress Control 3 or 2 to adjust the sound Output level AdjustmentsEx. When selecting the FM band Tuning into Stations ManuallyTuner Operations Press FM/AM to select the bandTo erase a stored preset station Using Preset TuningTuner Operations Press MemoryTo tune in a preset station Selecting the FM Reception ModeTo restore the stereo effect Channel number you wantWhat information can RDS signals provide? Using the RDS Radio DataSystem to Receive FM StationsPress PTY Search while listening To an FM station Set RDS/DVD Menu selector to RDS. RDSPress PTY 9 or PTY until PTY code you want appears On the display, while PTY Select is flashingJazz music Description of the PTY codesProgram Switching to BroadcastYour Choice Temporarily Press TA/NEWS/INFO repeatedlyDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1-channel reproductionAll Channel Stereo reproduction DAP Digital Acoustic Processor modes All Channel StereoCreating sound field HallAbout Relations between Speaker Layout and Surround Modes Creating Realistic Sound FieldsTurning on or off the Surround modes Selecting the Surround modesExcept for the digital multichannel Surround modePL II Music according to a playing source Press Test to check the speaker output balanceTo cancel Surround Mode Adjust the following speaker output levels from -10 to +10Press Test again to stop the test tone Press SoundAdjust the rear speaker output levels from -10 to +10 Using DAP Modes and All Channel Stereo Remote ControlTo cancel DAP Modes and All Channel Stereo Only for ALL CH ST. to adjust the center speaker levelPanorama control ON/OFF ModeRepeat steps 5 and 6 to adjust the other settings Press Control 3 or 2 to make adjustmentsUsing DAP Modes and All Channel Stereo Front Panel Repeat steps 5 and 6 to make other adjustmentsAdjusting the volume-VOLUME buttons Turning on the power-POWER buttonsMastering Remote Operations Reinforcing the Bass-BASS Boost buttonSelecting the channels-10 keys Adjusting the sound and operating tuner -10 keysOperating RDS These buttons work only for TV operations Mastering Remote OperationsOperating DVD menu for JVC’s DVD player Manufacturers’ codes for DVD player Codes Try to operate your DVD player by pressingTry to operate your STB by pressing STB Manufacturers’ codes for STB CodesManufacturers’ codes for VCR Codes If there are more than one code listed for your brand of TVCGM Try to operate your TV by pressing TVProblem Possible Cause Solution TroubleshootingOperations To be on the NextTroubleshooting Amplifier SpecificationsTuning Range KHz to SpecificationsFM tuner IHF AM MW/LW tuner0102NHMMDWJEIN

LVT0858-001A specifications

The JVC LVT0858-001A is a versatile and well-engineered speaker system designed for optimal audio performance and user satisfaction. Built with high-quality materials and advanced technologies, this speaker is perfect for enhancing the sound quality of your home entertainment setup.

One of the main features of the LVT0858-001A is its impressive sound output. The speaker is equipped with a robust driver that delivers clear and powerful audio across a wide frequency range. This allows listeners to experience the intricacies of their favorite music, movies, and games with exceptional clarity and depth. The precise engineering of the speaker ensures minimal distortion, allowing for an immersive listening experience.

The design of the JVC LVT0858-001A is sleek and modern, making it an attractive addition to any room. Its compact form factor allows it to fit seamlessly into various environments, whether placed on a shelf, mounted on the wall, or paired with a home theater system. The speaker's aesthetic, combined with its performance, makes it suitable for diverse applications, from casual listening to serious audiophile setups.

One of the standout technologies featured in the LVT0858-001A is its enhanced bass response. The speaker is designed with a dedicated subwoofer that deepens low-frequency sounds, ensuring that users can feel the pulse of the music or the rumble of action in films. This technology not only adds to the overall audio experience but also highlights the subtlety in soundtracks that might otherwise go unnoticed.

Additionally, the JVC LVT0858-001A is compatible with a variety of audio sources. Whether connecting through Bluetooth, HDMI, or traditional wired options, users can easily integrate the speaker into their existing audio systems. This flexibility enhances its functionality, making it a great choice for both casual users and audio enthusiasts alike.

In conclusion, the JVC LVT0858-001A speaker system combines advanced technologies, a sleek design, and exceptional sound quality. With features aimed at delivering an immersive audio experience, it stands out as a reliable option for anyone looking to elevate their sound experience. Whether for music, movies, or gaming, this speaker is engineered to satisfy even the most discerning listeners.
Top Page Image Contents