PTFE soleplate
A PTFE soleplate ICSP01 is not included in pack but can be purchased separately by contacting the shop where you purchased the steam station.
The soleplate can be fitted when ironing delicate items such as silk.
steaming the creases out of curtains, hanging clothes, wall hangings
1Make sure there is water in the tank.
2Turn the temperature control to
.
3When the green ready to steam light glows pull the material slightly with one hand: hold the iron upright with the other.
4Tilt the iron forwards, then move it down the material, pressing the steam button.
●Never steam clothes being worn. Keep your hands away from the steam and soleplate.
●Always ensure that the iron is facing away from the user and/or others when vertical steaming.
●For material other than linen or cotton, keep the iron off the material to avoid burning it.
care and cleaning
●Always switch off, unplug and allow to cool overnight before cleaning or storing.
●Empty the water tank.
●When carrying the unit, always lift from underneath and make sure the iron is secure before moving.
the outside soleplate
●Don’t scratch the outside by ironing anything hard eg zips.
●To remove minor remains of material stuck to the soleplate, rub lengthways with a soft, damp, non- metallic cleaning pad.
casing
●Wipe with a damp cloth.
the inside important
To extend the life of your steam station and to avoid a build up of scale, it is essential that you rinse out the boiler after every 10 refills or once a month. If you live in a hard water area increase the frequency of cleaning. Do not use chemical descaling agents or vinegar as they may damage your appliance.
●Clean the boiler making sure it has been allowed to cool overnight first. Turn the steam station upside down and pull back the flap covering the
boiler cap . Unscrew the boiler cap using a coin and empty out any water. Add one cup of tap or filtered water and shake the appliance then empty out all the water. Repeat this operation until the water from the boiler comes out clear and clean. When cleaning is finished pour 500ml fresh tap or filtered water into the boiler and screw the boiler cap back on again without using excessive force. Replace the cover. The unit is now ready to use. important: Aways add 500ml water direct to the boiler after cleaning to prevent damaging the steam station.
service and customer care
●If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
If you need help with:
●using your appliance
●servicing or repairs
Contact the shop where you bought your appliance.
5