Kenwood IC550 series manual Safety, Before plugging, Before using for the first time

Page 5

safety

When cleaning, never unscrew the boiler cap whilst the unit is pressurised. Steam will shoot out and burn you. Always switch off, unplug and leave overnight before commencing to clean the boiler.

●Don’t get burnt by the iron’s steam, hot water, soleplate or iron rest.

●Keep children away from the steam station. And make sure they can’t grab the cords and pull the steam station down.

●Trailing cords are a hazard, keep them out of the way to prevent accidents.

●Never iron clothes being worn.

●Never put the steam station, cord or plug in liquid – you could get an electric shock.

●Always remove the water tank from the steam station when filling from a tap.

●Don’t let the power and steam supply cords touch hot parts.

●During ironing pauses and after use always place the iron flat on the iron rest of the steam station.

●Never leave the steam station on unattended.

●Never use a damaged steam station. Get it checked or repaired: see ‘service and customer care’.

●Do not use the steam station if it has been dropped, or if there are any visible signs of danger or it is leaking.

●Don’t touch the appliance with wet or damp hands.

●Always unplug the steam station when not in use and allow to cool before moving or cleaning.

●It is extremely dangerous to direct the steam towards people or animals.

●Only use water with this appliance.

●During use, the steam station must be stable and used in a horizontal position.

●Never let the iron touch or rest against the water tank.

●This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

●Children should be supervised to ensure that they do not play with the appliance.

●Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

before plugging in

Make sure your electricity supply is the same as the one shown on the underside of the steam station.

●This iron complies with European Economic Community Directive 89/336/EEC.

before using for the first time

1Remove all packaging and any stickers or labels.

2Wind excess cord around the base of the steam station.

3Test the iron on an old cloth to make sure the soleplate and water tank are clean. We recommend that you allow steam to disperse by pressing the steam button in order to release any residues that may have built up during the manufacturing process.

●Repeat step 3 after prolonged periods of storage.

2

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK IC550 series English Français Deutsch Italiano Español Profe Before plugging SafetyBefore using for the first time Know your Kenwood steam station Using your steam stationSetting the temperature Steam ironing Dry ironingSet to Maximum steam and to the left for minimum steamService and customer care Care and cleaningAvant la première utilisation SécuritéUtilisation de la centrale de repassage La découverte de votre centrale de repassage KenwoodRemplissage de l’eau Choix de la température correcteConseils Réglage de la températureRepassage à sec Repassage à la vapeur’extérieur semelle Entretien et nettoyageSemelle en Ptfe Boîtier Service après-venteEssuyez au moyen d’un chiffon humide ’intérieur importantVerwenden Sie für dieses Gerät nur Wasser SicherheitGebrauch Ihrer Dampfstation Machen Sie sich mit Ihrer Kenwood Dampfstation vertrautVor dem ersten Gebrauch Füllen mit WasserWahl der richtigen Temperatur Einstellen der TemperaturTipps TrockenbügelnPTFE-Bügelsohle Pflege und Reinigung Kundendienst und ServiceDie Außenseite Bügelsohle GehäuseUtilizzare solo acqua con questo apparecchio SicurezzaPrima di collegare lapparecchio alla rete elettrica Prima di usare lapparecchio Per la prima voltaCome aggiungere l’acqua Per conoscere la vostra stiratrice KenwoodCome usare la stiratrice Consigli Come regolare la temperaturaPer stirare a secco Per stirare a vaporePiastra di Ptfe Cura e puliziaPiastra esterna InvolucroInterno importante Manutenzione e assistenza tecnicaNunca planche la ropa cuando esté puesta SeguridadAntes de enchufar Antes de utilizar por primera vezPara utilizar su estación de vapor Conozca su estación de vapor de KenwoodPara llenar de agua Cómo elegir la temperatura correctaPlanchado al vapor Cómo ajustar la temperaturaPlanchado en seco Placa de Ptfe Cuidado y limpiezaEl exterior placa CarcasaServicio técnico y atención al cliente

IC550 series specifications

The Kenwood IC550 series is a prominent line of integrated circuits that has gained recognition for its reliability, versatility, and advanced features suited for various applications. This series caters to a broad spectrum of industries, including automotive, telecommunications, and consumer electronics, and aims to deliver optimal performance and efficiency.

One of the main features of the Kenwood IC550 series is its robust architecture, which incorporates high-performance analog and digital signal processing capabilities. This makes it an excellent choice for applications requiring high fidelity audio processing. Additionally, the IC550 series employs state-of-the-art noise reduction technologies, ensuring that signals are transmitted with minimal interference, which is crucial in maintaining sound clarity and quality.

Another key characteristic of the IC550 series is its energy efficiency. With the increasing emphasis on sustainable technology, Kenwood has designed the IC550 series to consume lower power while still delivering exceptional performance. This makes it particularly suitable for portable devices where battery life is a priority, thus extending the usability of such gadgets.

The IC550 series also boasts excellent connectivity options. With built-in support for various communication protocols such as Bluetooth and NFC, these integrated circuits facilitate seamless connections with other devices, enhancing user experience in wireless audio and data transmission. The integration of such technologies allows manufacturers to create more versatile products that cater to the demands of modern consumers.

In terms of scalability, the Kenwood IC550 series is designed to be adaptable to various application requirements. Its modular design allows engineers to customize the circuits to fit specific needs, making it an attractive option for developers looking to create bespoke solutions that stand out in the market.

In conclusion, the Kenwood IC550 series represents a synthesis of quality, efficiency, and adaptability. Its advanced features, noise reduction technology, energy efficiency, extensive connectivity options, and scalability make it an ideal choice for a range of applications across multiple industries. As technology continues to evolve, the IC550 series is likely to remain a key player in the integrated circuit arena, catering to the growing demands for high-performance electronics.
Top Page Image Contents