WASHING AND DRYING
Load the drum
Open the drum door and load the laundry loosely in the drum.
Follow the load size indicator and do not overload.
Do not use detergent dispensing aids, e.g. plastic dispenser balls, for washing followed immediately by the drying programme. These dispensers can melt during the drying programme and cause damage to the machine and the laundry.
Close the drum door
Add detergent
Follow the detergent percentage display.
Start the programme
Press the Start/Stop button.
Remove the laundry when the programme has finished
Turn the programme selector to the Stop position.
Open the drum door and remove the laundry.
See "After each washing or drying programme" for further information.
After each washing or drying programme
Open the drum door fully.
Caution, the metal cap located on the inside of the door glass is very hot after drying. Do not touch it. It will be hot. Danger of burning!
Remove the laundry.
Check the folds in the door seal for any small articles, e.g. buttons, which might be lodged there. Remove any fluff remaining from around the door seal and porthole glass after drying.
Check that all items have been removed from the drum. Items left behind could colour run, shrink or be damaged in the next washing or drying programme.
Important: Always remove the laundry before switching the machine off. This is important to ensure that the load size indicator works correctly.
Switch the machine off using the On/ Off button .
Close the door.
Otherwise there is the danger of objects being placed inadvertently in the drum. If these remained unnoticed and were washed in the next load, they could damage the laundry.
48