
Installation and connection
To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed.
Fit the covers on to the two holes. Then plug the holes as shown with the caps.
The machine must not be moved without the transit bars in place. Store them in a safe place for future use. They must be
Re-fitting the transit bars
Levelling the machine
The machine must stand perfectly level on all four feet to ensure safe and proper operation.
The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered.
Using the spanner supplied turn counter nut 2 in a clockwise direction. Then turn counter nut 2 together with foot 1 to unscrew.
Use a spirit level to check the machine is standing level.
Hold foot 1 securely with a pipe wrench. Turn counter nut 2 again using the spanner supplied until it sits firmly up against the housing.
All four counternuts must sit firmly up against the housing. Please also check this for the feet which did not need adjustment. Otherwise there is the danger of the machine moving about.
70