Settings menu
Time
Select either a 24 hour or 12 hour clock, and then set the current time of day.
Clock format
Use the or buttons to select the way you want the time to be displayed and confirm your choice with the OK button.
Set the time of day
Set the hour with the and buttons and confirm your setting by pressing the OK button. Then do the same to set the minutes.
Temperature unit
You can chose for the temperature to be displayed in °C/Celsius or °F/ Fahrenheit.
The machine is delivered with the °C option selected.
Brightness / Contrast
There are ten different display settings.
The machine is delivered with this option set at: level 5
The display brightness/contrast will change as soon as a different setting is chosen.
Standby display
To save energy, the display goes out and the indicator light for the Start/ Stop button starts flashing slowly.
The display will always go out,
–if a programme is not selected within 10 minutes of the machine being switched on.
–10 minutes after the end of a programme.
Pressing one of the buttons switches the display back on again.
You can also choose whether you want the display to go out 10 minutes after a programme has started or to remain visible throughout the programme.
On
Standby comes on: The display will go out 10 minutes after a programme has started.
Not in current prog. (the machine is delivered with this option selected)
Standby is switched off: The display will remain visible during a programme.
Keypad tone
An audible tone sounds each time a button is pressed.
The machine is delivered with this option set at: Off
83