Miele WT2789iWPM operating instructions Drying levels Anti-crease, Extended cool down

Page 86

Settings menu

Drying levels

Anti-crease

The drying levels in the Cottons and Minimum iron programmes can be altered.

Select the required setting and then determine whether laundry should be damper or drier after drying.

Extended cool down

The cooling down phase which takes place before the end of a programme can be lengthened if required. This makes the garments easier to handle.

The cooling down phase can be lengthened from 0 min to 18 minutes.

Set the duration with the and buttons and confirm your setting by pressing the OK button.

The programme duration will increase accordingly.

Anti-crease helps prevent creasing if laundry is not normally removed immediately after the end of a programme.

The drum will turn at intervals for up to 30 minutes after the programme has finished. The door can be opened and laundry removed at any time during the anti-crease phase.

On: Anti-crease is activated (default setting).

Off: Anti-crease is deactivated.

86

Image 86

Contents Operating instructions Washer-dryer WT 2789 i WPM Disposal of your old machine Caring for the environmentDisposal of the packing material Contents Contents Contents Correct application Safety with children Technical safety Page Correct use Page Page Accessories PC / Optical interface Guide to the machineControl panel Programme selectorDisplay To wash and dry in a continuous sequenceSetting the time of day Before using for the first timeSetting the language Reminder to remove transport barsRunning your first programme Calibrating the load size sensor to zeroEnergy and water consumption When drying straight after washingWashing and drying environmentally and economically DetergentSort the laundry Short instructionsSeparate washing Switch the machine on Select a programmeSelect Extra options Load the drumAdd detergent 100%Start the programme Select Delay startRemove the laundry when the programme has finished After washing a full loadExtra options Further extrasAdding or removing laundry after a programme has started To omit the final spin Rinse hold Final spin speedRinse and interim spin To omit the spin between rinses and the final spinProgramme chart Delicates * cold to 60C Max. load 1.5 kg Automatic plus Cold to 40C Max. load 4.5 kgDark garments Cold to 40C Max. load 3.0 kg Sportswear Cold to 60C Max. load 2.0 kgSoft toys Cold to 40C Max. load 1.0 kg Outerwear Cold to 40C Max. load 2.0 kgProofing 40C Max. load 2.0 kg Hygiene 30 to 95C Max. load 5.5 kgCurtains Cold to 40C Max. load 1.0 kg Silks Cold to 30C Max. load 1.0 kgPillows Cold to 95C Pillows 40x80 cm or Pillow 80x80 cm Separate rinse Max. load 5.5 kgProgramme sequence Main wash Rinses SpinSpecial features in the programme sequences Detergent Washing with several components Right amount to dispense will depend on the followingWater softeners Colour run and dye removers/dyes Fabric conditioner and liquid starchAdding fabric conditioner or liquid starch separately Separate drying Tips on dryingSwitch the washer-dryer on Select a programme Close the drum door End of the programme unload the drumLow temperature ThermospinAdding or removing laundry after a programme has started Woollens Max. load 1.0 kg Minutes Cottons Max. load 3.0 kg Extra dry, Normal+, NormalNormal+, Normal**, Hand iron, Smoothing+1, Timed drying2 Freshen up Max. load 1.0 kg Smoothing Max. load 3.0 kg Warm air Max. load 3.0 kg Timed drying2Proofing Max. load 1.5 kg Normal Soft toys Max. load 1.0 kg Timed drying2Pillows Pillows 40x80 cm or 1 pillow 80x80 cm Timed drying2 Hygiene Max. load 3.0 kg NormalSilks Max. load 1.0 kg Minutes Cool air Max. load 3.0 kg Timed drying2Drying Washing and Drying Washing and drying in a continuous sequenceAfter each washing or drying programme Close the drum door Add detergentRinse out fluff programme Changing the programme sequence To cancel a programmeAltering the temperature Interrupting a programmeTo deactivate the safety lock Changing the spin speed Safety lockTo activate the safety lock Altering the drying level / drying timeAltering Delay start Delay startTo begin Delay start Cancelling delay startCleaning the machine Cleaning and careCleaning the drum Hygiene info Cleaning the detergent dispenser drawerCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Cleaning the porthole glassProblem solving guide Programme does not startFault message appears in the display Message Possible cause RemedyProblems with the load size indicator General problems An unsatisfactory wash result An unsatisfactory drying result Drum door cannot be opened by pressing the Door button Drain the machine Opening the drum doorCleaning the drain filter Guarantee After sales serviceFuture updates PC Optional accessoriesInstallation and connection Front viewRear view Removing the transit fittings Installation surfaceInstalling the washer-dryer Installation and connection Levelling the machine Re-fitting the transit barsNiche height Accessory Building under a continous worktop / in a kitchen runSpacer bars Removing the spacer barsFitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Fitting a plinth facing Plinth facing dimensionsInstallation Preparing the fixing pointsInlet hose Electronic unit and machine housingMiele water protection system Drain hoseExtension hose Maintenance and careConnection to the water supply Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Washing and DryingTechnical data Buzzer Settings menuLanguage Brightness / Contrast Temperature unitTime Standby displayLock code MemoryDistribution controller Longer pre-wash CottonsGentle action Drying levels Anti-crease Extended cool downOptional accessories CareCollectionLiquid detergent for Delicates UltraWhite detergentUltraColor detergent for coloured garments Fabric conditionerPage Page Page 8QLWHG.LQJGRP