Miele WT2789iWPM Fault message appears in the display, Message Possible cause Remedy

Problem solving guide

A fault message appears in the display

	Message	Possible cause		Remedy ￿
	Fault	– The water outlet is	– Clean the drain filter and
￿	Check drainage	blocked or		the drain pump as
	system	restricted.		described in "Problem
		– The drain hose has		solving guide – Opening
		been fixed too high.		the drum door in the
				event of a blocked drain
				outlet and/or power
				failure".
			–	The maximum delivery
				head is 1 m.
￿	Fault	The water inlet is	Check whether
	Water intake	blocked or restricted.	–	the stopcock is opened
	Open stopcock
				wide enough.
			–	the inlet hose is kinked.
			–	If the fault message
				appears again, contact
				the Miele Service Dept.
￿	Waterproof system	The water protection	–	Close the stopcock.
	activated	system has reacted.	–	Contact the Miele Service
	Close the stopcock
				Department.
￿	Technical fault	There is a fault.	Start the programme again.
	Call Service.		If the fault message
			appears again, contact the
			Miele Service Department.
Check detergent		Excessive foam has	Use less detergent next
		built up during	time and follow the
		washing.	manufacturer's instructions
			on dosage given on the
			packaging.
Hygiene info		See "Cleaning the drum (Hygiene info)" in "Cleaning
		and care" for further information.

￿To delete the message from the display switch the machine off using the On/Off button ￿.

57