Delay start
With delay start you can choose when you want the programme to end. The start of a programme can be delayed from 30 minutes up to a maximum of 24 hours,
The current time of day needs to have been set for Delay start to work correctly.
Select Delay start
Select the programme you want and then press the button.
Delay start | 9:51 |
|
|
Start time | 9:51 |
Finish time | 11:19 |
|
|
The display shows the current time of day and the time the programme is due to end.
Use the button to select the time you want the programme to end at.
|
|
Delay start | 9:51 |
|
|
Start time | 9:51 |
Finish time | 15:00 |
|
|
The first press on the button will adjust the programme end time to the next 15, 30, 45 minutes or full hour. Each subsequent press on the button will delay the programme end time by 15 minutes.
Confirm your selection by pressing the OK button.
To begin Delay start
Press the Start/Stop button.
Altering Delay start
Press the button.
Use the or buttons to change the programme end time.
Confirm your selection by pressing the OK button.
Cancelling delay start
Press the Start/Stop button.
Cancel delay start will appear in the display.
Confirm with OK.
Press the Start/Stop button to start the programme straight away or select a different programme.
The actual load size can only be determined accurately by the machine once the programme has started. The programme end time may, therefore, be a bit later or earlier than first indicated.
52