Installation and connection
Building under a continous worktop / in a kitchen run
N= Niche height
This machine is specially designed for installation under a continuous worktop run in a fitted kitchen.
It is supplied with a cover plate instead of a machine lid.
The cover plate is necessary to ensure electrical safety and must not be removed.
The machine must not be used without the front panel in place.
–The slides* can be used to protect the floor from damage when the machine is pushed into position or taken out for servicing.
–Connections for electricity, water and drainage should be installed in such a way that they remain accessible when the machine is in place.
Niche height | Accessory |
820 mm | None required |
|
|
from 830 - | Fit longer screw feet* |
840 mm | (Set to approx. |
| 40 mm) |
from 870 - | Use one raising kit* |
885 mm |
|
|
|
from 915 - | Use two raising kits* |
930mm
*optional accessory
If the kitchen run has a continuous furniture plinth in place, a gap must be made for the
71