Miele W 1930 Cleaning the water inlet filters, To clean the filter in the intake hose

Page 24

Cleaning and care

Cleaning the water inlet filters

The washing machine has two water in- take filters to protect the intake valves.

one in the open end of the intake hose.

and one where the hose is con- nected to the machine only to be cleaned by a technician.

The filter in the open end of the hose should be cleaned if intake problems occur, or after an interruption of the ex- ternal water supply.

To clean the filter in the intake hose:

^Turn off the main water valve.

^Unscrew the intake hose from the valve.

^Remove the flat gasket from inside the hose and, using needle nose pli- ers, grab the plastic tab and pull to remove the filter. Clean the filter un- der running water.

^Replace the filter and gasket in the reverse order and reconnect the hose.

Turn on the valve and check that the connection is water tight. If the connec- tion drips and cannot be tightened any further, the gasket may need to be re- placed.

Always replace the intake filter after cleaning it.

24

Image 24
Contents Operating instructions Contents Guide to the machine Detergent dispenser drawer Important safety instructions Before using the first time Help protect our environmentDisposal of the packing material Disposal of an old applianceOptimal usage EconomyPreparing the Laundry Before washingPrepare the wash load To start a program Press the Door button to open the door Load the machineRecommended load sizes are noted below Close the machine doorEnd of Program After washingPClose the drum door To cancel a program Changing the program sequenceTo interrupt a program To change an incorrectly selected programAdding detergent Using the Starch program to dis- pense liquid starch Adding fabric softener or starchStarch Program selection 11 lbs Pre-wash Available Water plus Gentle wash Lbs Program sequence Starch Spin Fine rinse Graduated spinFinal spin WoolensTextile care symbols Temperature Conversion ChartWashing C Tumble dryAdditional options Gentle washPre-wash Water plusDelay start/Time remaining indicator Time display HminCleaning and care To clean the washing machineCleaning the detergent drawer Pull the drawer out until it stopsCleaning the drain pump and lint trap Cleaning and care Cleaning the water inlet filters To clean the filter in the intake hoseProblem solving guide What to do if Cause RemedyIndicator lamp is Indicator lamp is flashOn indicator Pre-washSpite of adequate Water supply, the waterFlows slowly into the ma Chine? Large residues Detergent remainGrey greasy parti Cles cling to washedLaundry? Liquid detergentOpening the drum door in the event of a power failure Door hinged right Door hinged leftAfter sales service Installation surface InstallationRemoving the shipping struts Installation Instructions Adjust the four leveling feet as fol- lows Leveling the machineBuilding Washer / Dryer StackDecor panel dimensions Replacing the decor panelInstalling a cabinet matching toekick Water hardness reminder Plumbing Connections Drain connectionPlease note Electrical connection Grounding InstructionsProgrammable functions Step SecondsProgram Lock Child safety feature Desired functionHigh water level 5th rinse cycleAdditional rinse in Rapid wash To check if the function has been stored Deleting the additional func- tionsPerform Steps 1 to Technical data DimensionsSpecifications Temperature controlProgram duration approximate Spin speed Detergent dispenser