Miele W 1930 To check if the function has been stored, Deleting the additional func- tions

Programmable functions

To check if the function has been stored:

^Perform Steps 1 to 4.

If the "Rinse 1-2" lamp lights, the pro- grammable function is active.

^Press the "ON/OFF" button. This fin- ishes the check of the programmable function.

If, after Step 2, the programm selec- tor is accidentally turned to a setting other than one of the three shown:

–If the "Rinse 1-2" indicator does not light – no function was activated.

–If the "Rinse 1-2" indicator lights – proceed as in "Deleting the additional functions".

Exception: the "Rinse 1-2" indicator lamp will light up if the programm selector is set to "COTTONS 190°F".

Deleting the additional func- tions:

Follow the same instructions given un- der "To activate the additional func- tions", steps 1 to 5.

When the "Rinse 1-2" lamp goes out;

^Press "ON/OFF".

The additional function has now been deleted.

45