Miele W 1930 operating instructions Problem solving guide, What to do if Cause Remedy

Problem solving guide

Any work done on the electrical components of this appliance should only be performed by a qualified technician in accordance with all local and na- tional codes and regulations. Unauthorized repairs may result in personal injury and machine damage.

What to do if, . . .	Cause . . .	Remedy . . .
. . . The program does	There is no power.	Check that..:
not start?	The "ON" indicator lamp	– the door is properly
	has not lit up.
		closed.
		– the machine is plugged
		in.
		– the fuse or circuit
		breaker has not trip-
		ped.
	There is power and the	– Turn the program se-
	"ON" indicator lamp is on,	lector to the "Finish /
	but the program selector	Start" position.
	has not been turned to	– Select a program.
	the "Finish / Start" posi-
	tion.
. . . The "Check / "	The "Check p" indicator	– The inlet valve is not
indicator lamps are	lamp is flashing, and the	opened far enough.
flashing?	program has started.	– The inlet hose is
	The water inlet is blocked.
		kinked.
		– The water pressure is
		too low. Call the Techni-
		cal Service Dept.
	The "Check q" indicator	– Clean the drain pump
	lamp is flashing.	and lint trap.
	The drain is blocked.	– Has the drain hose
		been installed too
		high? (max drain height
		= 4 feet)

25