INSTALLATION INSTRUCTIONS
Replacing the decor panel
^Keep the door closed when replacing the decor panel.
^Remove the edge strip from the hinged side of the door by unscrew- ing the 4 screws shown in the illustra- tion. Three are on the side of the door and one is on the bottom.
^Loosen the remaining 7 screws from the bottom and side strips until the decor panel can be bowed slightly and slid off of the door.
^Install the new decor panel by revers- ing the above procedure.
Decor panel dimensions
| 1/16" thick |
| 1/16"- 3/16" |
| panel |
| thick panel |
Width | 23 | 1/16" | 23 1/16" |
Height | 23 5/8" | 23 7/16" | |
Panels more than 1/16" thick require an additional adapter strip,
Part # 3763550. It can be ordered from your Miele Dealer or the Miele Technical Service Department.
36