Miele W 1514 Before using for the first time, Setting the language, Running your first programme

Page 12

Before using for the first time

Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened to prevent the risk of water leaks during use.

For safety reasons, spinning is not possible until the machine has been prepared for using for the first time. To activate the spinning function you must run a wash programme without laundry and without detergent.

Using detergent could result in an excessive build-up of foam.

This also activates the ball valve. The ball valve prevents detergent escaping from the suds container into the sump during a wash programme, thus making maximum use of the detergent.

^Press the I-On/0-Offbutton in.

If the washing machine is being switched on for the first time, the welcome screen will appear.

The welcome screen will appear in the display every time the machine is switched on until a programme lasting longer than 1 hour has been completed.

Setting the language

You will be asked to select the language you require for the display. It is possible to change the language at any time via the programmable functions.

!deutsch

^If the language shown is not the one you want, select the language you do want by turning the programme selector. Confirm your selection by pressing the Start/Stop button.

Reminder to remove transit bars

To avoid the risk of damage, the transit bars must be removed before the machine is used for the first time. See "Installation and connection" for instructions on how to do this.

^After removing the transit bars (if this has not already been done by your fitter), press the Start/Stop button.

Running your first programme

Run a Cottons 60°C programme without any laundry and without detergent.

^Open the stopcock.

^Press the Start/Stop button.

^At the end of the programme switch the machine off.

The machine is now ready for use.

12

Image 12

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the washing machine Control panelProgramme duration Programmable functionsBefore using for the first time Setting the languageReminder to remove transit bars Running your first programmeWhen drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentHow to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select a temperature / spin speedShut the door with a gentle swing Select a programmeSelect an extra options ShortWater plus Pre-washAdd detergent Remove the laundry when the programme has finished Start the programmeSpinning Final spin speedRinse and interim spin To omit the final spin Rinse holdProgramme chart Automatic Cold to 40C Max. load 3.5 kg Shirts Cold to 60C Max. load 1.5 kgDenim Cold to 60C Max. load 2.0 kg Dark garments Cold to 40C Max. load 3.0 kgProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Garment care label symbols Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programmeSafety lock To activate the safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedDetergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesCleaning and care Cleaning the detergent dispenser drawerExtra cleaning External casing and fascia panelCleaning the siphon and conditioner channel Cleaning the detergent dispenser drawer housingDescaling the machine Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startFault messages in the display Problem Possible cause Remedy aGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Remove the leverBlocked drain outlet Opening the drum door After sales service Future updates PCAppliance guarantee Optional accessoriesInstallation and connection Front viewRear view Installation surface Transporting the machine to its installation siteRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineBuilding under a worktop Washer-dryer stackPlease note Electronic unit and washing machine housing Miele water protection systemInlet hose Drain hoseMaintenance and care Connection to the water supplyExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Programmable functions Language FWater plus Gentle actionSuds cooling To use the washing machine when the code is activated CodeTo activate the code To enter the codeTemperature unit BuzzerKeypad tone BrightnessStandby display Memory Anti-creaseNot in current prog OffAlteration rights reserved/1707/W Nr 972 310