Spinning
Final spin speed
Programme | rpm |
Cottons | 1400 |
Minimum iron | 1200 |
Delicates | 600 |
Woollens | 1200 |
Express | 1400 |
Automatic | 1200 |
Shirts | 600 |
Denim | 900 |
Dark garments | 1200 |
Spin | 1400 |
You can reduce the final spin speed. However, you cannot select a final spin speed higher than that shown in the chart above.
Rinse and interim spin
There is a spin after the main wash and between the rinses. A reduction in the final spin speed will also reduce the interim spin speed. If a spin speed of less than 700 rpm is selected for a Cottons programme, an additional rinse is introduced.
To omit the final spin (Rinse hold)
^Select the e setting using the Spin speed button. The laundry will not be spun and will remain suspended in the final rinse water. This reduces creasing if the laundry is not going to be removed from the drum immedi- ately after the end of the programme.
–To start the final spin:
The washing machine will display the maximum spin speed possible. You can select a spin speed lower than this. Start the final spin by pressing the Start/Stop button.
–To end the programme:
Press the Door button. The water will drain away. Press the Door button again to open the door.
To omit rinse and interim spin and the final spin (No u)
^Select the No u setting using the Spin speed button. The laundry is not spun after the final rinse. The water will drain away and the machine will go straight into the
19