Changing the programme sequence
Adding or removing laundry after a programme has started
^Press the Door button to open the drum door.
^Add or remove items.
^Close the drum door.
The programme will continue automatically.
Please note:
Once a programme has started the machine cannot recognise any adjustment to the load.
For this reason, if laundry is added or removed after the start of a programme, the machine will always complete the programme cycle assuming a full load which can lead to an increase in the programme duration shown in the display.
The door cannot be opened, if:
–the suds temperature is above 55°C.
–the water is above a certain level.
–the programme has reached the Final spin stage.
If you press the Door button when the above conditions are present, the following will appear in the display:
:Door locked
Safety lock
The safety lock prevents the machine from being opened, the programme from being cancelled or the machine from being switched off during a wash programme.
To activate the safety lock
^Press and hold in the Start/Stop button after the programme has started.
Stop or in 3 secs 0
^Keep the Start/Stop button pressed in until the time has elapsed and the following appears in the display:
Locked 0
The safety lock is now activated. It is deactivated automatically at the end of the programme.
To deactivate the safety lock
^Press and hold in the Start/Stop button after the programme has started.
Unlock in 3 secs 0
^Keep the Start/Stop button pressed in until the time has elapsed and the following appears in the display:
Unlocked 1
26