Miele W 1514 Code, To activate the code, To enter the code, To deactivate the code

Page 57

Programmable functions

Code

A code can be used to lock the electronics on the washing machine to prevent it being used without your knowledge.

When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated.

Code ...

^Press the Start/Stop button.

To activate the code

Activate

^Press the Start/Stop button.

The display will now request that a code is entered.

To enter the code

The code is 125 and cannot be altered.

O__ __

^Turn the programme selector until the first number appears in the display.

^Confirm your selection of the number by pressing the Start/Stop button.

^Repeat the process until all three numbers have been entered.

1 2 5

^Press the Start/Stop button.

The following will appear in the display:

Code activated

Once the machine is switched off, it can only be used again if the code is entered.

To use the washing machine when the code is activated

When the machine is switched on again, the display will request the code.

^Enter code 125 as described above and confirm the entry.

The washing machine is now unlocked and ready for use.

To deactivate the code

Make sure the washing machine is switched off and the door is properly closed. Press the Start/Stop button and keep it pressed in whilst you press the l-On/0-Offbutton in.

As soon as . . .

O__ __

. . . appears in the display, release the Start/Stop button.

^Now enter the code and press the Start/Stop button.

^Select Code and confirm Deactivate.

57

Image 57

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the washing machineProgrammable functions Programme durationSetting the language Before using for the first timeReminder to remove transit bars Running your first programmeWashing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentHow to wash correctly Brief instructionsSort the laundry Select a temperature / spin speed Switch on the washing machine Load the drumShut the door with a gentle swing Select a programmeShort Select an extra optionsWater plus Pre-washAdd detergent Start the programme Remove the laundry when the programme has finishedFinal spin speed SpinningRinse and interim spin To omit the final spin Rinse holdProgramme chart Shirts Cold to 60C Max. load 1.5 kg Automatic Cold to 40C Max. load 3.5 kgDenim Cold to 60C Max. load 2.0 kg Dark garments Cold to 40C Max. load 3.0 kgMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Garment care label symbols Changing the programme sequence Cancelling a programmeInterrupting a programme Changing a programmeTo activate the safety lock Safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedDetergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Colour run and dye removers / dyes Fabric conditioners and liquid starchCleaning the detergent dispenser drawer Cleaning and careExtra cleaning External casing and fascia panelCleaning the siphon and conditioner channel Cleaning the detergent dispenser drawer housingDescaling the machine To clean the filter in the water inlet valve Cleaning the water inlet filtersProgramme does not start Problem solving guideProblem Possible cause Remedy a Fault messages in the displayGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Remove the leverBlocked drain outlet Opening the drum door Future updates PC After sales serviceAppliance guarantee Optional accessoriesFront view Installation and connectionRear view Installation surface Transporting the machine to its installation siteRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetBuilding under a worktop Washer-dryer stackPlease note Miele water protection system Electronic unit and washing machine housingInlet hose Drain hoseMaintenance and care Connection to the water supplyExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Language F Programmable functionsWater plus Gentle actionSuds cooling Code To use the washing machine when the code is activatedTo activate the code To enter the codeBuzzer Temperature unitKeypad tone BrightnessAnti-crease Standby display MemoryNot in current prog OffAlteration rights reserved/1707/W Nr 972 310