Miele W 1514 operating instructions Miele water protection system, Inlet hose, Drain hose

Page 48

Installation and connection

The Miele water protection system

The Miele water protection system protects the washing machine from water damage.

The system consists of three main components:

1)the inlet hose

2)the electronic unit and the washing machine housing

3)the drain hose

1)Inlet hose

The inlet hose can withstand pressure of more than 7,000 kPa.

2)Electronic unit and washing machine housing

–Sump

Any leaking water is collected in a sump in the base of the machine. A float switches off the safety valves, preventing any more water flowing into the machine and water in the suds container is pumped away.

–Overflow protection

This prevents the washing machine taking in too much water. If the water level exceeds a certain level, the drain pump switches in and pumps the excess water away.

3)Drain hose

The drain hose is protected by a ventilation system which prevents the washing machine from being emptied completely.

48

Image 48

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the washing machine Control panelProgramme duration Programmable functionsBefore using for the first time Setting the languageReminder to remove transit bars Running your first programmeWhen drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentHow to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select a temperature / spin speedShut the door with a gentle swing Select a programmeSelect an extra options ShortWater plus Pre-washAdd detergent Remove the laundry when the programme has finished Start the programmeSpinning Final spin speedRinse and interim spin To omit the final spin Rinse holdProgramme chart Automatic Cold to 40C Max. load 3.5 kg Shirts Cold to 60C Max. load 1.5 kgDenim Cold to 60C Max. load 2.0 kg Dark garments Cold to 40C Max. load 3.0 kgProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Garment care label symbols Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programmeSafety lock To activate the safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedDetergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesCleaning and care Cleaning the detergent dispenser drawerExtra cleaning External casing and fascia panelCleaning the siphon and conditioner channel Cleaning the detergent dispenser drawer housingDescaling the machine Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startFault messages in the display Problem Possible cause Remedy aGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Remove the leverBlocked drain outlet Opening the drum door After sales service Future updates PCAppliance guarantee Optional accessoriesInstallation and connection Front viewRear view Installation surface Transporting the machine to its installation siteRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineBuilding under a worktop Washer-dryer stackPlease note Electronic unit and washing machine housing Miele water protection systemInlet hose Drain hoseMaintenance and care Connection to the water supplyExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Programmable functions Language FWater plus Gentle actionSuds cooling To use the washing machine when the code is activated CodeTo activate the code To enter the codeTemperature unit BuzzerKeypad tone BrightnessStandby display Memory Anti-creaseNot in current prog OffAlteration rights reserved/1707/W Nr 972 310