Miele W 1514 Changing the programme sequence, Cancelling a programme, Interrupting a programme

Page 25

Changing the programme sequence

Cancelling a programme

You can cancel a programme at any time after it has started.

^Press the Start/Stop button.

Cancel programme

^Press the flashing Start/Stop button again.

The suds will be pumped away.

If you want to remove the laundry:

^Press the Door button.

If you want to select a different programme:

^Switch the machine off with the I-On/0-Offbutton.

^Switch the washing machine back on again.

^Select and start a new programme.

Interrupting a programme

^Switch the machine off with the I-On/0-Offbutton.

To continue with the same programme:

^Switch the machine back on with the I-On/0-Offbutton.

Changing a programme

After the start of a programme it is no longer possible to select a different programme.

Temperature

It is possible to select a different temperature up to 5 minutes after the programme has started.

^Press the Temperature button.

Spin speed

It is possible to change the spin speed up until the final spin begins.

^Press the Spin speed button.

Extra options

It is possible to select or deselect the Short and Water plus extra options up to five minutes after the programme has started.

A programme cannot be cancelled or changed if the safety lock has been activated.

25

Image 25

Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the washing machineProgrammable functions Programme durationSetting the language Before using for the first timeReminder to remove transit bars Running your first programmeWashing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentBrief instructions How to wash correctlySort the laundry Select a temperature / spin speed Switch on the washing machine Load the drumShut the door with a gentle swing Select a programmeShort Select an extra optionsWater plus Pre-washAdd detergent Start the programme Remove the laundry when the programme has finishedFinal spin speed SpinningRinse and interim spin To omit the final spin Rinse holdProgramme chart Shirts Cold to 60C Max. load 1.5 kg Automatic Cold to 40C Max. load 3.5 kgDenim Cold to 60C Max. load 2.0 kg Dark garments Cold to 40C Max. load 3.0 kgMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Garment care label symbols Changing the programme sequence Cancelling a programmeInterrupting a programme Changing a programmeTo activate the safety lock Safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedCorrect detergent DetergentAll purpose Detergent for Coloured fabrics Delicates Whites Washing with several components Water softenersRight amount to dispense will depend on the following Colour run and dye removers / dyes Fabric conditioners and liquid starchCleaning the detergent dispenser drawer Cleaning and careExtra cleaning External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the siphon and conditioner channelDescaling the machine To clean the filter in the water inlet valve Cleaning the water inlet filtersProgramme does not start Problem solving guideProblem Possible cause Remedy a Fault messages in the displayGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Remove the lever Procedure for draining the machineBlocked drain outlet Opening the drum door Future updates PC After sales serviceAppliance guarantee Optional accessoriesFront view Installation and connectionRear view Transporting the machine to its installation site Installation surfaceRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher-dryer stack Building under a worktopPlease note Miele water protection system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Language F Programmable functionsGentle action Water plusSuds cooling Code To use the washing machine when the code is activatedTo activate the code To enter the codeBuzzer Temperature unitKeypad tone BrightnessAnti-crease Standby display MemoryNot in current prog OffAlteration rights reserved/1707/W Nr 972 310