Miele W 1514 operating instructions Electrical connection U.K, Non-rewireable plugs BS

Page 51

Installation and connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply.

Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100 Section 739).

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

51

Image 51

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the washing machineProgrammable functions Programme durationRunning your first programme Before using for the first timeSetting the language Reminder to remove transit barsDetergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumptionHow to wash correctly Brief instructionsSort the laundry Select a programme Switch on the washing machine Load the drumSelect a temperature / spin speed Shut the door with a gentle swingPre-wash Select an extra optionsShort Water plusAdd detergent Start the programme Remove the laundry when the programme has finishedTo omit the final spin Rinse hold SpinningFinal spin speed Rinse and interim spinProgramme chart Dark garments Cold to 40C Max. load 3.0 kg Automatic Cold to 40C Max. load 3.5 kgShirts Cold to 60C Max. load 1.5 kg Denim Cold to 60C Max. load 2.0 kgMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Garment care label symbols Changing a programme Cancelling a programmeChanging the programme sequence Interrupting a programmeAdding or removing laundry after a programme has started Safety lockTo activate the safety lock To deactivate the safety lockDetergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Colour run and dye removers / dyes Fabric conditioners and liquid starchExternal casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Extra cleaningCleaning the siphon and conditioner channel Cleaning the detergent dispenser drawer housingDescaling the machine To clean the filter in the water inlet valve Cleaning the water inlet filtersProgramme does not start Problem solving guideProblem Possible cause Remedy a Fault messages in the displayGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Remove the leverBlocked drain outlet Opening the drum door Optional accessories After sales serviceFuture updates PC Appliance guaranteeFront view Installation and connectionRear view Installation surface Transporting the machine to its installation siteRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetBuilding under a worktop Washer-dryer stackPlease note Drain hose Electronic unit and washing machine housingMiele water protection system Inlet hoseMaintenance and care Connection to the water supplyExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Language F Programmable functionsWater plus Gentle actionSuds cooling To enter the code To use the washing machine when the code is activatedCode To activate the codeBrightness Temperature unitBuzzer Keypad toneOff Standby display MemoryAnti-crease Not in current progAlteration rights reserved/1707/W Nr 972 310