Miele W 1514 operating instructions Fault messages in the display, Problem Possible cause Remedy a

Page 34

Problem solving guide

Fault messages in the display

Problem

Possible cause

Remedy A

 

 

 

; lights up in the

– The water outlet is

– Clean the drain filter and

display and

blocked or

the drain pump.

Drain fault

restricted.

– The maximum delivery

flashes.

– The drain hose has

head is 1 m.

 

been fixed too high.

 

 

 

 

; lights up in the

– The water inlet is

Check whether

display and

blocked or

– the stopcock is opened

Water inlet

restricted.

properly.

fault

 

– the inlet hose is kinked.

flashes.

 

 

– the water pressure is too

 

 

 

 

low.

 

 

 

; lights up in the

The water protection

Call the Service Department.

display and

system has reacted.

 

Waterproof

 

 

fault

 

 

flashes.

 

 

 

 

 

; lights up in the

There is a fault.

Start the programme again.

display and

 

If the fault message appears

Technical

 

again, contact the Service

fault

 

Department.

flashes.

 

 

 

 

 

Anti-crease

Excessive foam has

Use less detergent next time

Chk detergent

built up during

and follow the manufacturer's

flashes in the display.

washing.

instructions on dosage given

 

 

on the packaging.

 

 

 

ATo switch off the fault message: Switch the machine off with I-On/0-Offbutton.

34

Image 34
Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the washing machine Control panelProgramme duration Programmable functionsReminder to remove transit bars Before using for the first timeSetting the language Running your first programmeEnergy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentBrief instructions How to wash correctlySort the laundry Shut the door with a gentle swing Switch on the washing machine Load the drumSelect a temperature / spin speed Select a programmeWater plus Select an extra optionsShort Pre-washAdd detergent Remove the laundry when the programme has finished Start the programmeRinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdProgramme chart Denim Cold to 60C Max. load 2.0 kg Automatic Cold to 40C Max. load 3.5 kgShirts Cold to 60C Max. load 1.5 kg Dark garments Cold to 40C Max. load 3.0 kgProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Garment care label symbols Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeTo deactivate the safety lock Safety lockTo activate the safety lock Adding or removing laundry after a programme has startedCorrect detergent DetergentAll purpose Detergent for Coloured fabrics Delicates Whites Washing with several components Water softenersRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesExtra cleaning Cleaning and careCleaning the detergent dispenser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the siphon and conditioner channelDescaling the machine Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startFault messages in the display Problem Possible cause Remedy aGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Remove the lever Procedure for draining the machineBlocked drain outlet Opening the drum door Appliance guarantee After sales serviceFuture updates PC Optional accessoriesInstallation and connection Front viewRear view Transporting the machine to its installation site Installation surfaceRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineWasher-dryer stack Building under a worktopPlease note Inlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseConnection to the water supply Maintenance and careExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Programmable functions Language FGentle action Water plusSuds cooling To activate the code To use the washing machine when the code is activatedCode To enter the codeKeypad tone Temperature unitBuzzer BrightnessNot in current prog Standby display MemoryAnti-crease OffAlteration rights reserved/1707/W Nr 972 310