Miele T 8822 C operating instructions

Page 12

Warning and Safety instructions

￿The dryer must not be used without the fluff filters in place or if the fluff filters are damaged in any way.

￿The fluff filters must be cleaned regularly.

￿The dryer must not be used without the condenser unit in place.

￿The fluff filters must be thoroughly dried after cleaning. Damp or wet filters could cause operational faults.

￿Do not install the tumble dryer in a room where there is a risk of frost occurring. At temperatures around freezing point the tumble dryer may not be able to operate properly. There is a risk of damage if the condensed water is allowed to freeze in the pump and in the drain hose. The ambient room temperature should be between +2°C and +35°C.

￿If the water is drained externally instead of being collected in the condensed water container, make sure the drain hose is securely attached if you hang it in a sink or basin to avoid the hose slipping and the water causing damage.

￿Condensed water is not drinking water.

It can cause health problems in both people and animals.

￿Always keep the area around the tumble dryer free of dust and fluff. Dust drawn into the tumble dryer can cause blockages in the condenser unit over time.

￿The tumble dryer must not be hosed down.

12

Image 12
Contents Operating instructions For condenser tumble dryer T 8822 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Garment care label symbols Tips on dryingDrying IroningHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes Start the programme Before the end of a programmeRemove the laundry at the end of the programme Extra options / Delay start Delay startExtra options Cottons Max. load 7 kg Extra dry, Normal Hand iron, Machine ironMinimum iron Max. load 3.5 kg Normal, Hand iron Delicates Max. load 2.5 kg Normal, Hand ironProgramme chart Shirts Max. load 2 kg Normal, Hand iron Cool air Max. load 7 kgWarm air Max. load 7 kg Gentle smoothing Max. load 1 kgAltering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesProblem Possible cause Remedy Airways indicatorTo switch off this To switch off this warningProblem Possible cause Remedy Start/Stop button is Programme indicatorFlashing slowly Display is darkAn unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long orProblem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer afterChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation Front viewInstallation site Transporting the dryer to its installation siteRear view Replacing the lidBefore moving the tumble dryer again e.g. when moving house Levelling the applianceRoom ventilation Washer-dryer stackExternal condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcareTechnical data To check the setting Programmable functionsReduced residual moisture. Laundry drier Programmable functions Hours anti-crease factory default setting Anti-creaseAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesFactory default. Not in current pro- gramme StandbyOff Follow the steps ,, ... to pro- gramme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 847 520
Related manuals
Manual 56 pages 37.44 Kb