Miele T 8822 C operating instructions

Warning and Safety instructions

￿Danger.

This tumble dryer must not be connected to a controllable socket (e.g. a timer switch or a peak load shut-off device).

If the dryer programme were to be interrupted before the end of the cooling down phase, the laundry could self-combust.

￿To prevent the risk of fire, the following must not be tumble dried:

–items which have been cleaned using chemicals (e.g. professional dry-cleaning agents).

–fabrics which contain a large proportion of rubber, foam rubber or rubber-like materials. For example, products made from latex foam rubber, shower caps, waterproof textiles, rubberised articles and items of clothing and pillows with foam rubber filling.

–damaged items which contain padding or fillings (e.g. pillows, jackets). When damaged, the filling can get out with the risk of igniting in the dryer.

￿In many programmes, the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them (this also avoids the danger of the laundry self-igniting). The programme is not finished until the cooling down phase has been completed.

As soon as the programme has finished, remove all laundry from the drum.

￿Fabric conditioner and similar products must be used according to the instructions on the manufacturer's packaging.

￿Do not let anyone sit or lean on the door, as this can cause the tumble dryer to tip up.

￿Always close the door after use. This way you will avoid the danger of:

– children climbing into the dryer or hiding things in it.

– pets or other small animals climbing into it.

11