Programmable functions
Clean out airways indicator
Fluff should be removed after drying. The Clean out airways indicator will remind you to clean the filters when a certain amount of fluff has collected in the filters. You can decide at what level of fluff this reminder should be given.
You will have an idea of how often this should be done after a few drying programmes.
Follow the steps (,, ...) to pro- gramme and store in memory.
Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
Press the Start/Stop button and keep it pressed in whilst carrying out steps
Switch the dryer on.
Wait until the Start/Stop button lights up constantly . . .
. . . and then release the Start/Stop button.
Press the Low temperature button eight times.
–The Low temperature indicator light will flash on and off slowly once.
A number to show which option is selected will appear in the display alternating with the letter P.
0Clean out airways indicator light deactivated
IClean out airways indicator light comes on when there is a heavy
(the Automatic plus indicator light will also flash once).
2Factory default setting
(the Automatic plus indicator light will also flash twice).
3Clean out airways indicator light comes on when there is only a light
(the Automatic plus indicator light will also flash three times).
Pressing the Start/Stop button switches between the options.
Switch the dryer off.
The setting you have selected is now stored in memory. You can change it again at any time.
To check the setting:
Carry out steps to .
Switch the dryer off after step .
59