Miele T 8822 C operating instructions Installation, Front view

Page 41

Installation

Front view

￿ Mains connection cable

￿ Service panel for condenser unit

￿ Condensed water container

￿ Four height-adjustable screw feet

￿ Control panel

￿ External drainage options (e.g. via

￿ Door

wash basin, wash basin drain outlet,

or gully. See "External condensed

 

 

water outlet").

41

Image 41
Contents Operating instructions For condenser tumble dryer T 8822 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryerFollowing are also selected via the display Programme duration / Estimated time remainingDisplay shows Tips on drying Garment care label symbolsDrying IroningBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerDrying level programmes Select any Extra options / Delay startSelect a programme Remove the laundry at the end of the programme Start the programmeBefore the end of a programme Extra options Extra options / Delay startDelay start Hand iron, Machine iron Cottons Max. load 7 kg Extra dry, NormalMinimum iron Max. load 3.5 kg Normal, Hand iron Delicates Max. load 2.5 kg Normal, Hand ironProgramme chart Cool air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 7 kg Gentle smoothing Max. load 1 kgChanging the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has startedTo deactivate the lock Electronic system lockTo activate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off this To switch off this warningProgramme indicator Problem Possible cause Remedy Start/Stop button isFlashing slowly Display is darkAn unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long or Been cleaned Problem Possible cause Remedy Water leaks from Power cut Dryer afterChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationTransporting the dryer to its installation site Installation siteRear view Replacing the lidLevelling the appliance Before moving the tumble dryer again e.g. when moving houseRoom ventilation Washer-dryer stackArranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Woollens handcare Consumption dataTechnical data Reduced residual moisture. Laundry drier To check the settingProgrammable functions Programmable functions Anti-crease off Hour anti-crease Hours anti-crease factory default settingAnti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzerReduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down timeStandby Factory default. Not in current pro- grammeOff Follow the steps ,, ... to pro- gramme and store in memoryFactory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activatedClean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 847 520
Related manuals
Manual 56 pages 37.44 Kb