Miele T 8822 C operating instructions An unsatisfactory drying result

Page 36

Problem solving guide

An unsatisfactory drying result

Problem

Possible cause

Remedy

The laundry is not

The load consisted of

– Finish drying using the

sufficiently dry.

different fabrics.

Warm air programme.

 

 

– Select a different pro-

 

 

gramme next time *.

Items made of synthetic

Synthetic fibres tend to

Static charge can be

fibres are charged with

attract static charge.

reduced by adding a

static electricity after

 

fabric conditioner to the

drying.

 

final rinse in the washing

 

 

programme or a fabric

 

 

conditioner sheet to the

 

 

load when drying.

There is a build-up of

Fluff is principally the

Fluff is collected by the

fluff.

result of friction when

fluff filters and can be

 

garments are being worn

removed easily (see

 

and to some extent when

"Cleaning and care").

 

they are being washed.

 

 

Machine drying does not

 

 

affect the lifetime of the

 

 

fabric.

 

*You can alter the drying levels for some programmes (see "Programmable functions" at the the end of this booklet).

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating instructions For condenser tumble dryer T 8822 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Garment care label symbols Tips on dryingDrying IroningHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes Start the programme Before the end of a programmeRemove the laundry at the end of the programme Extra options / Delay start Delay startExtra options Cottons Max. load 7 kg Extra dry, Normal Hand iron, Machine ironMinimum iron Max. load 3.5 kg Normal, Hand iron Delicates Max. load 2.5 kg Normal, Hand ironProgramme chart Shirts Max. load 2 kg Normal, Hand iron Cool air Max. load 7 kgWarm air Max. load 7 kg Gentle smoothing Max. load 1 kgAltering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesProblem Possible cause Remedy Airways indicatorTo switch off this To switch off this warningProblem Possible cause Remedy Start/Stop button is Programme indicatorFlashing slowly Display is darkAn unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long orProblem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer afterChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation Front viewInstallation site Transporting the dryer to its installation siteRear view Replacing the lidBefore moving the tumble dryer again e.g. when moving house Levelling the applianceRoom ventilation Washer-dryer stackExternal condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcareTechnical data To check the setting Programmable functionsReduced residual moisture. Laundry drier Programmable functions Hours anti-crease factory default setting Anti-creaseAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesFactory default. Not in current pro- gramme StandbyOff Follow the steps ,, ... to pro- gramme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 847 520
Related manuals
Manual 56 pages 37.44 Kb
Top Page Image Contents